Loading... Please wait...

Our Newsletter


Crown CTs3000 3000 Watts Powered Stereo Amplifier

Share |
Image 1
  • Image 1
Price:
$3,456.00
SKU:
CRO CTS3000
Brand:
Crown
Shipping:
Calculated at checkout
Quantity:



Product Description

CTs Series

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Crown Switching Power Supply for lighter weight
  • Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

CTs 2 Channel Specifications

Minimum Guaranteed Power (20 Hz - 20 kHz)
CTs 600 Power at 0.1% THD
CTs 1200 Power at 0.1% THD
CTs 2000 Power at 0.35% THD
CTs 3000 Power at 0.35% THD
2-ohm Dual (per ch.)
150W
250W
1000W
1500W
4-ohm Dual (per ch.)
300W
600W
1000W
1500W
8-ohm Dual (per ch.)
300W
600W
1000W
1250W
16-ohm Dual (per ch.)
300W
300W
625W
625W
70V Dual (per ch.)
300W
600W
1000W
1500W
100V Dual (per ch.)
300W*
600W*
1000W
1500W
4-ohm Bridge
300W
500W
2000W
3000W
8-ohm Bridge
600W
1200W
2000W
3000W
16-ohm Bridge
600W
1200W
2000W
2500W
100V Bridge
600W
1200W*
2000W
3000W
140V Bridge
600W
1200W
2000W
3000W
200V Bridge
600W*
1200W*
2000W
3000W
Performance
CTs 600
CTs 1200
CTs 2000
CTs 3000
Frequency Response (at 1 watt, 20 Hz - 20 kHz)
± 0.25 dB
Signal to Noise Ratio (ref. rated power, 20 Hz to 20 kHz, A-weighted)
< 105 dB
Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz
< 0.1%
< 0.1%
< 0.35%
< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power
< 0.1%
< 0.1%
< 0.35%
< 0.35%
Damping Factor: 10 Hz to 100 Hz
> 3000
Crosstalk (below rated power) 20 Hz to 1kHz
> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz, typical)
50 dB
DC Output Offset
< 2 mV
Input Impedance nominally balanced, nominally unbalanced
10 k ohms,5 k ohms
Maximum Input Level Before input compression Absolute maximum
+20 dBu + 32 dBu
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono
2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*
2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*
2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*
2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V*, 140V and 200V*
Voltage Gain (at maximum level setting) 8/4 Ohm Operation 26 dB 70V Operation 100V Operation

35:1 (31 dB) 20:1 (26 dB) 50:1 (34 dB) n/a 
50:1 (34 dB) 20:1 (26 dB) 50:1 (34 dB)  n/a
63.9:1 (36 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)
71.4:1 (37 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)
Input Sensitivity 2/4/8 ohms 70V 100 V 26 dB gain
1.4V 1.4V n/a 4 ohm: 1.74V. 8 ohm: 2.46V
1.4V 1.4V n/a 4 ohm: 2.46V. 8 ohm: 3.47V
1.4V 1.4V 2.0V 4 ohm: 3.17V. 8 ohm: 4.48V
1.4V 1.4V 2.0V 4 ohm: 3.88V. 8 ohm: 5.01V
Required AC Mains (+15%, – 25%)
120V/60 Hz, 230V/50 Hz
Power Draw at Idle (120 VAC mains)
24W (Standby Mode)
24W (Standby Mode)
35W (Standby Mode)
35W (Standby Mode)
Overall Group Delay
< 120 usec
Cooling
Continuously variable speed forced air, front-to-back airflow

* With T-170V or TP-170V.

blog comments powered by Disqus