Adder DDX USR DVI/VGA/DisplayPort KVM Extender and Matrix User Station

Adder DDX USR DVI/VGA/DisplayPort KVM Extender and Matrix User Station

Part of the ADDERView DDX range, the DDX USR is the user station for the DDX range, a high performance KVM Matrix that provides powerful functionality inside small, compact form factors. When connected directly to the DDX Computer Access Module or CAM (sold separately), it creates a KVM extender. When combined with the DDX10 or DDX30 (also sold separately), it forms an integral part of a KVM Matrix.

User Station for the Direct Connect Matrix system: hardware can be removed from desks up to 164 feet/50m away from user console, reducing noise levels and increasing employee comfort and productivity

Easily expand your installation: for each new computer system and user, simply add a USR and CAM module, safeguarding your investment

High Quality video: lossless HD video in real-time

Please Note: A minimum specification of Cat6a or CAT7 Shielded Twisted Pair (STP) cables must be used with the DDX10, DDX30, DDX CAM and DDX USR. Recommended cables are SFTP, unshielded cables are not suitable for DDX. Extension distances up to 164 feet/50m are supported with single uninterrupted runs of recommended cable (shielded CAT6a or CAT7 cable, CAT5 or CAT5e cables must NOT be used).

Key Features

• Perfect digital video: uncompressed video technology provides ultra-low latency and pixel perfect digital video up to 24 bits per color at a maximum of 1920 x 1200 over 60Hz, including 1080p, with real time control
• EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the date coming from the source monitor
• Plug and Play: delivered in a zero-config state so they work as soon as they are connected, without the need for drivers or software
• Simple CATx cabling: analog audio, video and USB 2.0 HID pass through a widely available SFTP cable, which also connects the central switch to the user console (up to 164 feet/50m) and computer dongles/CAM (up to 32 feet/10m)

Technical Specifications

Approvals / Compliance
CE
FCC
Standards
Resolutions up to 1920 x 1200 at 60Hz are supported, including 1080p.
Supports USB2.0 (Low, Full Speed) HID devices.
Cable Requirements
A minimum specification of Shielded Twisted Pair (STP) cables must be used with the DDX30, DDX10, DDX CAM and DDX USR. Recommended cables are SFTP:
Daetwyler 7702 Flexible patch cable
Daetwyler 7120 Bulk cable
Unshielded cables are not suitable for DDX. Distances are achieved using single lengths of SFTP trunk/bulk cable with two 3m SFTP patch cables. For each additional break/patch connection reduce distance by 5m. Patch cables must be SFTP.
Environmental
0 to 40 Degrees C / 32 to 104 Degrees F
Connectors
DVI-D, USB type A x 4, 6p6c options port, 3 x 3.5mm jack sockets for headphone out, microphone in and line out
Network connector 30 x 8p8c ports for user connection
Mechanical
Compact case, robust metal construction. 170mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs
Power
Locking 3-pin DC jack, 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter
Software
All known operating systems
Warranty
2 Year Limited