Crestron SIW-100 Room Availability Status Indicator, Wall Mount

Crestron SIW-100 Room Availability Status Indicator, Wall Mount

Mounts to the wall outside a meeting room to provide indication of the room’s availability. Also suitable for any application requiring a wall mount status indicator.

With just a glance down the hallway, the SIW-100 status indicator provides highly-visible indication of a room’s availability as part of a complete Crestron enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The clear acrylic lens glows bright green or red to indicate room availability. The complete assembly mounts to the wall over a single-gang electrical box or plaster ring.

Key Features

• Provides highly-visible indication of room availability
• Reveals every free meeting room at a glance down the hallway
• Stylish wall mount design with clear acrylic lens
• Clearly visible at 50 feet or 15 meters
• Out-of-the-box functionality when used with a TSS-770, TSS-1070, TSW-770(-GV), or TSW-1070(-GV) series touch screen <1>
• Illuminates vivid green or red to indicate room availability status
• Custom functionality possible when connected to a Crestron control system <2>
• Supports RGB color mixing via custom control system programming
• Allows virtually any color illumination (except white)
• Energy efficient at less than 2 Watts power consumption
• Single-wire USB or Cresnet connectivity <1,2>
• Mounts to a single-gang electrical box or plaster ring
• Mullion mounting kit available separately
• Projects 2 inches (52 mm) from the wall

Technical Specifications

Indicator
Lens Material
Acrylic
Illumination
Edgelit RGB LED
Functionality
Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB <1>, supports custom RGB color mixing when connected to a control system <2>
Communications
USB
USB 2.0 device for connection to a TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen <1>
Cresnet
Cresnet slave mode <2>
Connectors
CNET
(1) 4-pin 3.5 mm detachable terminal block;
Cresnet slave port <2>
USB
(1) Micro-USB Type B connector, female;
USB 2.0 device port <1>;
6 ft (1.83 m) micro-B male to A male USB cable included
Controls
CNET ID
(1) Pushbutton (behind bezel) for Cresnet TSID (touch-settable ID)
Power
USB
1.2 Watts @ 5 Volts USB power <1>
Cresnet Power Usage
2 Watts @ 24 Volts DC
Environmental
Temperature
41° to 113° F (5° to 45° C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
4 BTU/hr on USB power;
7 BTU/hr on Cresnet power
Construction
Composition
Metal bracket with replaceable acrylic lens and magnetically-held gray plastic bezel
Mounting
Mounts to a 1-gang U.S. electrical box or plaster ring (optional mullion mount kIt'sold separately)
Dimensions
Height
6.41 in (163 mm)
Width
2.79 in (71 mm)
Depth
2.16 in (55 mm)
Projects 2 in (52 mm) from the mounting surface
Weight
1.0 lb (454 g)