Doug Fleenor Design LED300 Power Supply for Color Kinetics
Description
Description
Doug Fleenor Design LED300 Power Supply for Color Kinetics
The LED300 power supply distributes DMX512 data and 24 Volt power to lighting fixtures and accessories. Primarily designed to power and control Color Kinetics ColorBlast 12 LED fixtures, the LED300 can also drive Color Kinetics iColor Cove, Altman Spectra PAR, and similar products, as well as color scrollers, gobo rotators, and other powered DMX512 controlled accessories. The LED300 features our DownShifter technology that shifts incoming DMX512 data and outputs the desired channels as channels 1, 2 and 3. This allows all fixtures to be set to address "001" with the power supply routing the proper signals to the proper outputs.
Technical Specifications
Input power
115VAC, 50/60 Hz. 5.5A. Required UL statement: The LED300 must be located near the power outlet powering it and the outlet must be easily accessible.
Input signal
DMX512, DMX512/1990, DMX512-A (250 Kb/s, 0.2 Volts min. 12 Volts max.)
Input circuit
Transient protected EIA-485 transceiver (LT1785)
Input protection
15,000 Volt transient, -60 Volt continuous
Input connector
Gold plated 5 pin male XLR connector (Neutrik D-1 series)
Input pass through
Gold plated 5 pin female XLR connector (Neutrik D-1 series) All five pins are passed through
Input isolation
600 Volts
Output signal
DMX512-A when set for 5V differential data
DMX512-A timings and protocol with 24V single ended levels when switched to 24V data
Output circuit (5V)
Transient protected EIA-485 transceiver (LT1785) yields an approximate 3V signal into 120 Ohms
Output circuit (24V)
MC34074 high speed op-amp tuned for 4uS bit period (250 Kb/s) yields approximately 22V at load
Output connector
Gold plated 4 pin female XLR (Neutrik D-1 series) rated at 10 amps
Output current (power)
12.5 amps (300 watts) continuous
Indicators
Red/green data type indicator, Red/green polarity indicator, Green signal indicator, Three digit DMX Start Address
User controls
Three pushbuttons to increment DMX Start Address (hundreds, tens, and ones)
Color
Black with white silkscreen nomenclature
Size and weight
9.25" h X 5.25" d X 9.75" w, 7.5 pounds
Mounting options
Two 1/2" holes for half couplers or āCā Clamp and handle slot
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
