Matrix Switch MSC-XV3232L 32 Input 32 Output Composite Analog Video Router

Matrix Switch MSC-XV3232L 32 Input 32 Output Composite Analog Video Router

The MSC-XV3232L composite analog video routing switcher has 32 inputs and 32 outputs. With a minimum signal bandwidth of 50MHz this router is more than enough for any analog video installation. The use of premium quality components, extensive shielding and low noise linear on-board power supply regulation has resulted in systems with extremely low crosstalk and noise levels.

Matrix Switch Corporation analog video routers can be used standalone or combined with additional analog video routers to produce a 2 channel YV router or 3 channel YUV or RGB router. When used in conjunction with the MSC-GCP2U32 LCD remote control panel, multiple analog video routers can be combined to expand the available input or output channels, using cascaded systems or input replication.

Matrix Switch Corporation routers provide several options for control and system integration. The built-in webpage interface offers a convenient method for control and configuration using a PC or mobile device. In addition to the powerful yet easy to use MASCOT protocol, there is support for some common 3rd party protocols. Additional control interfaces on this router include: USB, RS-485, RS-232, AUX GPIO, and TCP/IP over the Ethernet interface. Matrix Switch Corporation Remote Panels can also be used with this router for remote control up to a virtually unlimited distance over TCP/IP.

The built-in button panel provides an additional interface for directly changing the matrix routing state.

Key Features

• Additional audio level can be connected to D25 connector (see Related Products), with break away from video support
• Inputs can be switched to multiple outputs without restriction
• Vertical interval switching using vertical sync input (Tri-level sync or NTSC/PAL black burst)
• Store and recall up to 10 preset salvos
• Includes button control panel interface
• Supports Matrix Switch Corporation Remote Panels
• Ethernet port for control via built in web page interface or TCP/IP ports
• Interactive web page interface
• Serial control via RS-232 port
• RS-485 port for an additional high speed long distance capable control interface
• Support for some common 3rd party protocols for added integration flexibility
• Auxiliary port for external status and control signaling
• Real Time Operating System (RTOS) with 32-bit ARM processor
• System software updates from webpage interface
• External DC power supply
• Redundant power supply included
• Complies with all relevant FCC, U/L, CE, and RoHS requirements
• Backed by a full 2-year manufacturer parts and labor warranty

Technical Specifications

General
Inputs
32
Outputs
32
Enclosure Type
2RU
Size
19” x 3.50” x 11”
Weight
12.0 lbs
Power
12 VDC 5A Adapter
Power Connector
D9 Male
Panel Type
Buttons
Ethernet
10/100 Base-T Auto MDIX
Made in
USA
Composite Video
Connector Type
BNC
Input/Output Impedance
75 Ohms
Nominal Input/Output Level
1V P-P
Maximum Input/Output Level
+/- 2V P-P
Input Return Loss
< 40dB at 5MHz typical
Output Return Loss
< 35dB at 5MHz typical
Overall Gain Unity
+/-1% into a 75-ohm termination
Frequency Response
+/- 0.1dB to 5MHz +0 -3dB to 60MHz
Crosstalk
> 60dB at 5MHz all hostile
Differential Phase
< 0.2 degrees at 3.58MHz @ 4.43MHz
Differential Gain
< 0.2% at 3.58MHz @ 4.43MHz
S/N Ratio
> 75dB 0 to 10MHz
Reference Sync
Connector Type
Analog BNC with pass-through
Format
Tri-Level Sync and NTSC/PAL Black Burst
Item Includes
Button control panel interface
Redundant power supply
Warranty
full 2-year manufacturer parts and labor warranty