Neumann KH 810 G 7.1 Analog Bass Managed Subwoofer

Neumann KH 810 G 7.1 Analog Bass Managed Subwoofer

The KH 810 is an answer to the demands by offering a 7.1 High Definition Bass Manager. The flexibility of this bypassable 7.1 bass manager means it is also compatible with all standard consumer formats from mono through to the latest 7.1 HD systems.

Eight channels of analog ensures flexible interconnectivity for modern studios. Four-mode LFE-channel processing guarantees compatibility across all formats and industries. Forth-order crossovers and flexible acoustical controls allow for seamless system integration. Built-in volume control and a hardware remote control allows for centralized system control independent of the source, and the electronics can be remote located to reduce cabling. From Mono to 3D, there are uses for the KH 810 in many different system configurations.

IMPROVING LATERAL CONSISTENCY
The latest amplifier technology and acoustical components have been used to ensure the most accurate sound reproduction possible. Robust drivers, a rock-solid cabinet, and carefully designed ports guarantee a tight, articulate, and distortion-free low frequency reproduction, even at high replay levels. Using the sum output, Plane Wave Bass Array (PWBA) techniques acoustically improves lateral consistency in the listening area. The bass extends down to 18 Hz.

COMPLEMENTS EXTENSIVE RANGE OF MONITORS T
he KH 810 subwoofer is designed to complement Neumann's extensive range of monitors, and can be used on its own, or daisy-chained to make larger systems capable of higher SPL. The KH 810 can be used in music, broadcast, and post production studios for tracking, mixing, and mastering. The cabinet can be positioned next to a wall or flush mounted into a wall due to the front mounted port, and can be mixed freely in multichannel systems with other loudspeakers from Neumann's range.

APPLICATIONS
Bass extension for loudspeakers down to 18 Hz
Increasing the maximum SPL of loudspeakers by up to 8 dB
Decreasing harmonic and intermodulation distortion of loudspeakers
Reproducing the LFE channel
Reproducing the “Sub” signal of a bass managed multichannel source
Making a Plane Wave Bass Array system
Working as an extension for KH line subwoofer systems

Technical Specifications

Free field frequency response ±6 dB
17 … 600 Hz
Free field frequency response ±3 dB
18 … 300 Hz
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)
<20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space
95 dB SPL (>45 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)
110.7 dB SPL
Reproduction accuracy between 50 Hz and 100 Hz: 100%, 80%, 50% of subwoofers produced
±1.20; ±0.54; ±0.28 dB
Crosstalk (1 kHz), level matching
-95 dB; ±0.1 dB
LFE Gain
0 / +10 dB
Analog input(s)
8 x XLR: analog electronically balanced
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)
112 dB SPL
Equalization: Low cut
30 Hz; 0 … -12 dB
Equalization: Parametric EQ: Gain
+4 ... -12 dB
Equalization: Parametric EQ: Frequency
Bypass; 20 ... 120 Hz
Equalization: Parametric EQ: Q
1 ... 8
Phase
0; 45; 90; 135 and 0/180 deg
Display: Bass Management on
Green LED
Cabinet weight when electronics remote located
24.2 kg (53 lbs 6 oz)
Bass Extension (Hz, -6 dB)
17
Maximum output level (dB SPL)
110.7
Max. Listening Distance up to (m)
6
Analog input(s)
8 x XLR: analog electronically balanced
Analog input impedance
>13k Ohms
Max. input level
+19 dBu
Common mode rejection ratio (CMRR)
> 56 dB @ 15 kHz
Volume control
NRC 1 hardware remote or RS-232
Volume control range; resolution
118 dB; 0.25 dB
Analog dynamic range; THD+N
119 dB(A); <0.001% (-100 dB)
Signal routing modes
LFE 80+re-routing; LFE 80 Hz; LFE 120 Hz; Wide
Input gain control (sensitivity)
+2 ... -12 dB
Output level control (output level in 1 m based on 0 dBu input level)
100; 114 dB SPL
Controller design
Analog, active
Crossover frequency
80 Hz
Crossover slope
24 dB/oct; 4th order
Protection circuitry
Peak and thermo limiters
Infrasonic filter: frequency; slope
6.5 Hz; 12 dB/oct.
Remote control
RJ45 connector: Via NRC1 remote control (optional): volume for all channels; bass management on/off; LFE gain 0/10 dB.Via RS-232: more parameters remote controllable
Display: On; Normal Operation
Red LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute
Red LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%)
200 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)
160 W
Mains Power Supply: input voltage; frequency
220-240 / 100-120 V (switchable); 50/60 Hz
Power consumption (230 V / 100 V): Idle
20 W
Power consumption (230 V / 100 V): Full output
290 W
Cabinet material
Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back)
Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions
+10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions
-25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer
265 mm (10") with magnetic shielding and protecting black metal grille
Product dimensions (height x width x depth)
360 x 330 x 645 mm (14.2" x 13" x 25.4")
External net volume
76.6 liters
Packed dimensions (height x width x depth), mm (inches)
515 x 490 x 750 mm (20 1/4" x 19 1/4" x 29 1/2")