Shure SLXD24D/B58-G58 Wireless Dual Handheld Microphone System with Beta 58

Shure SLXD24D/B58-G58 Wireless Dual Handheld Microphone System with Beta 58

Introducing the SLXD24D/B58 Wireless System: High Quality Audio for Live Performances and Presentations

Designed for lecture halls and live performances, the SLXD24D/B58 is equipped with two Beta® 58 Supercardioid Dynamic Microphone capsules on SLXD2 handheld wireless transmitters. Enjoy clear digital audio and reliable RF stability with this cutting-edge wireless solution.

With the SLXD24D/58 Wireless System, you'll experience transparent, 24-bit digital audio and dependable RF performance. Setup is quick and easy, and the system accommodates up to 32 compatible systems per 44 MHz band. Optional rechargeability accessories are available for wireless excellence on the go.

The SLXD24D/B58 ships with a dual-channel receiver (SLXD4D), two handheld transmitters (SLXD2/B58) with antenna and rackmount accessories, and 4 AA batteries – everything you need to amplify your message and connect with your audience.

Key Features

• Premium wireless system known for delivering transparent 24-bit digital audio.
• It features an extended 20 Hz to 20 kHz frequency range, which is dependent on the microphone.
• Boasting a 118dB dynamic range, this product ensures quality sound output.
• It offers digital predictive switching diversity.
• The tuning bandwidth is 44 MHz, but this can vary depending on the region.
• Each frequency band can have up to 32 available channels, region dependent.
• This system can support up to 10 compatible systems per 6MHz TV band and 12 systems per 8MHz band.
• It comes with an easy pairing function of transmitters and receivers through IR scan and sync.
• An automatic channel scan has been incorporated for convenience.
• With the ability to link multiple receivers for group scans and firmware updates via Ethernet port, this system provides remarkable versatility.
• It is fully compatible with Shure Wireless Workbench® control software for further enhancements.
• The system can remotely monitor and control through the ShurePlus™ Channels app for easy management.
• Third-party setup and control is possible via Ethernet.
• The device features an elegant and user-friendly interface with a high-contrast LCD menu for easy navigation.
• Each SLX-D receiver comes with a guided setup mode to ensure smooth operation.
• The transmitters use 2 AA batteries or a Shure SB903 rechargeable battery for versatility and power efficiency.

Technical Specifications

SLXD2 Handheld Transmitter
Battery Type
Rechargeable Li-Ion or 1.5 V AA batteries
Dimensions
37.1 x 176 mm (1.46 x 6.93 in.), D x L
Weight
147 g
Housing
Aluminum
Maximum Input Level
8.2 dBV (2.57 Vrms, 7.27 Vpp)
Note: Dependent on microphone type
Antenna Type
Integrated Single Band Helical
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW

SLXD4 / SLXD4D Rack Receiver
Dimensions
SLXD4: 42 x 197 x 152 mm (1.65 x 7.76 x 5.98 in.), H x W x D
SLXD4D: 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.), H x W x D
Weight
SLXD4: 816 g, without antennas
SLXD4D: 1451 g, without antennas
Housing
Galvanized Steel
Power Requirements
15 V DC @ 600 mA, supplied by external power supply (tip positive)
Spurious Rejection
>75 dB, typical
Connector Type
BNC
Impedance
50 Ω
Phantom Power Protection
1/4" (6.35 mm): Yes
XLR: Yes
Gain Adjustment Range
-18 to +42 dB in 1 dB steps
Configuration
1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance
1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
Full Scale Output
1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
XLR: LINE setting= +15 dBV, MIC setting= -15 dBV
Mic/Line Switch
30 dB pad
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100 m (328 ft)

Included Accessories
1 dual channel receiver
2 handheld transmitter with mic cartridge
2 mic clip
2 brass adaptor for the mic clip
4 AA batteries
2 1/4 wave antennas
2 bulkhead adapters
2 22" BNC cables
1 power supply
2 black vinyl zippered bag
2 rack mount bracket (short)
1 hardware kit
1 quick start guide
1 warranty
4 adhesive foot