Yorkville C110 Legacy Series Two-Way Compact 5-Inch Loudspeaker

Yorkville C110 Legacy Series Two-Way Compact 5-Inch Loudspeaker

The C110 features an internal 70V matching transformer, which allows multiple C110's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (10W, 20W, 30W or off) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets.

A wide variety of mounting options are available using the four integral screw-slots or the provided metal L-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The C110 is available in a low-reflectance black finish with a matching, perforated metal grille and can be painted to match its surroundings.

Key Features

• Two-Way Compact 70-volt Installation Loudspeaker
• 5-inch Woofer / 1-inch Mylar Dome Tweeter
• Selectable 70-volt or 8-ohm Operation
• Power Taps at 10, 20 and 30 Watts
• 40 watts (8-ohm mode)
• Screw Terminal Input
• ABS Plastic Cabinet and Metal Grille
• Mounting L-Bracket Included

Technical Specifications

System Type
2-way, Full Range
Active or Passive
Passive
Power Rating (Watts)
40
Nominal Impedance (Ohms)
8
Sensitivity (dB @1Watt/1m)
92
Frequency Response (Hz +/- 3dB)
85 - 19,000
Driver Configuration
Tweeter, 5 inches
HF Driver(s)
Mylar Tweeter
HF Dispersion (°H x °V)
90x90
LF Driver(s)
5 inches
Inputs
1
Inputs - Screw Terminal
1
Other Controls / Features
Internal 70V Transformer with Switchable Taps (10W / 20W / 30W / Off)
Flying Hardware
L-Bracket, Rear Key Hole Mounts (4)
Enclosure Materials
Injection Molded, ABS Plastic
Port(s)
1
Grille
Perforated Steel
Covering / Finish
Low Reflective Black
Dimensions (DWH xbackW, inches)
5.5 x 6.25 x 8.9
Dimensions (DWH xbackW, cm)
14 x 15.9 x 22.6
Weight (lbs/kg)
3.8 / 1.7