Free shipping on orders above $99* Details

Same-day Shipping for most orders before 10AM PST

Trusted by Professionals Since 1991

Appsys  |  SKU: APPS-ADS8

Appsys ADS-8 Active ADAT/Toslink-Splitter and Repeater

$8900
Shipping calculated at checkout.

Condition: New



Description

Appsys ADS-8 Active ADAT/Toslink-Splitter and Repeater

The ADS-8 ADAT/Toslink Splitter allows you to connect any signal source to two sinks. The active design overcomes the limitations of traditional passive splitters: They essentially half the amount of light on each output, causing problems because the attenuated signal is too weak for proper transmission of high-speed data. In contrast, the ADS-8 receives the optical signal, converts it to an electrical signal which can be split without loss to the out put transmitters which operate on each port with full power. As a side effect, it acts as signal repeater which doubles the reach of each connection.

Key Features

  • Reliable, lossless, true bit-transparent splitting of any signal
  • Doubles maximum transmission distance of an optical connection from normally 5-10m to 10-20m, depending on the equipment used
  • Near-zero latency
  • All channels present on the input are available on both outputs
  • Compatible with all audio formats which can be sent over TOSLINK
  • Quality product "Made in Switzerland"

Technical Specifications

Input/Output
Optical connector, F05 Type TOSLINKcompatible
Transmitted audio formats
ADAT, SPDIF, Dolby Digital 5.1 and other TOSLINK compatible formats (up to 96 kHz sample rate/15 Mbit data rate)
Power supply
9..12VDC 50mA
Plug:ID=2.5mm OD=5mm Length=9mm Polarity: Center Positive

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Appsys

Appsys ADS-8 Active ADAT/Toslink-Splitter and Repeater

$8900

Appsys ADS-8 Active ADAT/Toslink-Splitter and Repeater

The ADS-8 ADAT/Toslink Splitter allows you to connect any signal source to two sinks. The active design overcomes the limitations of traditional passive splitters: They essentially half the amount of light on each output, causing problems because the attenuated signal is too weak for proper transmission of high-speed data. In contrast, the ADS-8 receives the optical signal, converts it to an electrical signal which can be split without loss to the out put transmitters which operate on each port with full power. As a side effect, it acts as signal repeater which doubles the reach of each connection.

Key Features

Technical Specifications

Input/Output
Optical connector, F05 Type TOSLINKcompatible
Transmitted audio formats
ADAT, SPDIF, Dolby Digital 5.1 and other TOSLINK compatible formats (up to 96 kHz sample rate/15 Mbit data rate)
Power supply
9..12VDC 50mA
Plug:ID=2.5mm OD=5mm Length=9mm Polarity: Center Positive

View product