Audio-Technica AT8035 | 14.5in Line Gradient Condenser ENG Outdoor Recording Microphone

Audio-Technica AT8035 14.5in Line Gradient Condenser ENG Outdoor Recording Microphone

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

Key Features

• Designed for video production and broadcast (ENG/EFP) audio acquisition
• Length is well-suited for ENG, outdoor recording and other specialized uses
• Provides the narrow acceptance angle desirable for long-distance sound pickup
• Excellent sound rejection from the sides and rear of mic
• Switchable low-frequency roll-off
• Operates on battery or phantom power
• RoHS compliantfree from all substances specified in the EU directive on hazardous substances

Technical Specs

ELEMENT
Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN
Line + gradient
FREQUENCY RESPONSE
40-20,000 Hz
LOW FREQUENCY ROLL-OFF
80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY
Phantom: -38 dB (12.5 mV) re 1V at 1 Pa
Battery: -39 dB (11.2 mV) re 1V at 1 Pa
IMPEDANCE
Phantom: 250 ohms
Battery: 300 ohms
MAXIMUM INPUT SOUND LEVEL
Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
Phantom: 110 dB, 1 kHz at Max SPL
Battery: 98 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
72 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS
11-52V DC, 2 mA typical
BATTERY TYPE
1.5V AA/UM3
BATTERY CURRENT / LIFE
0.4 mA / 1200 hours typical (alkaline)
SWITCH
Flat, roll-off
WEIGHT
170 g (6.0 oz)
DIMENSIONS
369.0 mm (14.53") long,
21.0 mm (0.83") diameter
OUTPUT CONNECTOR
Integral 3-pin XLRM-type
ACCESSORIES FURNISHED
AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
AUDIO-TECHNICA CASE STYLE
SG1