Audio-Technica ATW-1101/H | System 10 Wireless Headworn Microphone System

Audio-Technica ATW-1101/H System 10 Wireless Headworn Microphone System

Audio-technica's ATW-1101/H System 10 digital high-fidelity wireless system is designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

Key Features

• Extremely easy operation with instantaneous channel selection, sync, and set-up
• State-of-the-art digital receiver for reliable performance
• Balanced XLR and unbalanced 1/4 output jacks with level control
• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range completely free from TV interference
• Three levels of diversity assurance: frequency, time, and space
• Automatic frequency selection for seamless, interference-free operation

Technical specs

Includes
Audio-Technica ATW-T1001 System 10 Digital UniPak Transmitter
ATW-R1100 System 10 Digital Wireless Receiver
PRO 8HEcW Headworn Hypercardioid Dynamic Mic
Large Foam Windscreen for Headworn Microphone
Small Foam Windscreen for Headworn Microphone
AT8439 Clothing Clip
Power Supply
Audio-Technica Warranty

Operating Frequencies
2.4 GHz ISM band
Dynamic Range
>109 dB (A-weighted), typical
Total Harmonic Distortion
<0.05% typical
Operating Range
30m (100') typical
Operating Temperature Range
0deg. C to +40deg. C (32deg. F to 104deg. F)
Frequency Response
20 Hz to 20 kHz
Audio Sampling
24 bit / 48 kHz
Receiver: Receiving System
Diversity (frequency/time/space)
Receiver: Maximum Output Level
XLR, balanced: 0 dBV
1/4" (6.3 mm), unbalanced: +6 dBV
Receiver: Power Supply
100-240V AC (50/60 Hz) to 12V DC 0.5A (center positive) switched mode external power supply
Unipak Transmitter: RF Output Power
10 mW
Unipak Transmitter: Spurious Emissions
Following federal and national regulations
Unipak Transmitter: Input Connection
1x 4-pin locking connector
Wiring: Pin 1: GND / Pin 2: INST INPUT / Pin 3: MIC INPUT / Pin 4: DC BIAS +9V
Unipak Transmitter: Batteries
Two 1.5V AA
Unipak Transmitter: Battery Life
>7 hours (alkaline)
Microphone: Element
Dynamic
Microphone: Polar Pattern
Hypercardioid
Microphone: Frequency Response
200 Hz - 18 kHz
Microphone: Open Circuit Sensitivity
-55 dB (1.7 mV) re 1V at 1 Pa
Microphone: Impedance
600 ohms
Microphone: Connector
Locking 4-Pin HRS connector
Microphone: Cable Length
55" (1.4 m)
Microphone: Headset nominal
4.72" / 11.98cm
Microphone: Flexible boom
3.17" / 8.05cm
Microphone: Diameter
0.80" / 2.03cm
Dimensions (W x H x D)
Receiver: 7.48 x 1.82 x 5.06" / 18.99 x 4.62 x 12.85cm
Unipak Transmitter: 2.76 x 4.21 x 0.98" / 7.01 x 10.69 x 2.48cm
Weight
Receiver: 290 g (10.22 oz)
Unipak Transmitter: 100 g (3.52 oz)
Microphone: 2.1 oz (59.53 g)