Audio-Technica ATW-R3210N EE1 3000 Series Network Diversity Receiver, EE1 530-590 MHz

Audio-Technica ATW-R3210N EE1 3000 Series Network Diversity Receiver, EE1 530-590 MHz

The ATW-R3210 receiver features automatic frequency scanning that eliminates the need for searching for clear channels by automatically selecting the most appropriate frequency for the area in which the wireless is operating. 25 kHz frequency spacing enables the system to easily find an open frequency in crowded RF environments, while pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system. Once selected, frequencies can be synced with transmitters using the system’s IR sync functionality. The system’s squelch setting can be configured to automatically adjust to maximize range while minimizing potential interference. Advanced digital Tone Lock squelch provides enhanced rejection of interference. In addition, the Tone Lock signal from the transmitter also conveys information on the transmitter’s battery condition and mute status back to the receiver for display. The receiver’s dual-mode front panel display can switch between the standard view, which provides continuous indication of RF signal strength, frequency, mute status, audio modulation level of the received signal, and transmitter information, and a performance view, which highlights key metering. Settings can be easily adjusted using the control dial and BACK button located on the receiver’s front panel. Settings can also be locked to prevent them from being changed.

Key Features

• 3000 series wireless receiver
• 60 MHz UHF tuning bandwidth in each of 6 available frequency bands
• Frequency scan and IR sync functionality for ease of setup
• Dual-mode receiver display can switch between standard or performance view
• Antenna power available for powered antennas and other in-line RF devices
• Balanced and unbalanced audio output jacks

Technical Specifications

Operating Frequencies
Band DE2: 470.125 to 529.975 MHz
Band EE1: 530.000 to 589.975 MHz
Band EF1: 590.000 to 649.975 MHz
Band FG1: 650.000 to 699.875 MHz
Band GH2: 794.100 to 805.900 MHz
Band HH2: 821.100 to 831.900 MHz and 863.100 to 864.900 MHz
Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.
Minimum Frequency Step
25 kHz
Modulation Mode
FM
Maximum Deviation
ATW-T3201: ±38 kHz (THD:10%)
ATW-T3202: ±36 kHz (THD:10%)
Simultaneous Use
40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent
Frequency Response
ATW-T3201: 31 Hz to 15500 Hz
ATW-T3202: 25 Hz to 16700 Hz
Operating Range
100 m
Dynamic Range
ATW-T3201 Mic input: > 115 dB (A-weighted), typical
ATW-T3201 Inst input: > 112dB (A-weighted), typical
ATW-T3202: > 115 dB (A-weighted), typical
Total Harmonic Distortion
<1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range
-5 ºC to +45 ºC
Receiver
Receiving System
True Diversity
Sensitivity
20 dBuV at 60 dBA S/N ratio (50 termination)
Maximum Output Level
XLR / Balanced: +14 dBV
6.3 mm (¼"") / Unbalanced: +8 dBV
Antenna Input
BNC-type, 50
Power Output
12 V DC, 160 mA (combined)
Power Supply
100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions
210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
Weight
1100 g, without accessories
Accessories Included
Two Flexible UHF antennas
AC adapter (country dependent)
Rack Mount Adaptors