The ADX12 & ADX18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings, and teleconferencing. With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control. The ADX12 and ADX18 are designed with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit the microphone holder.

Technical Specifications

Transducer Type
Pre-Polarized Condenser
Frequency Response
40 Hz – 18 kHz
Polar Pattern
Cardioid/Hypercardiod
Output Impedance
150 ohms
Sensitivity
24 mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k
Equivalent Noise Level
28 dB (A weighted)
Signal to Noise Ratio
66 dB
Maximum SPL
?120 dB
Power Requirements
18 – 52 Volts phantom
Connector
3-pin XLRm
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish
Machined Aluminum / Black Finish
Weight
113 g / 4 oz (ADX12) 159 g / 5.6 oz (ADX18)
Length
403 mm / 16 in (ADX12) 558 mm / 22 in (ADX18)

SKU: ADIX-ADX12HC Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Audix ADX12HC Miniature Gooseneck Hypercardioid Condenser Microphones, 12 Inches”

There are no reviews yet.