Audix MG18 | Miniature Gooseneck Condenser Microphone
Description
Description
Audix MG18 Miniature Gooseneck Condenser Microphone
The MG18 is professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound quality and ease of operation, the MG18 have the ability to accurately capture and reproduce vocals from a comfortable distance.
The MG18 is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. With a wide frequency range of 60 Hz - 19 kHz, the MG12/15/18 provide natural sound with exceptional transient response.
The MG18 gooseneck system is equipped with a sophisticated dual preamp circuitry one circuit located in the capsule housing and the other circuit built into the base of the XLR. This circuitry is internally balanced, insuring that the audio path will be isolated from hum and noise. In addition, the circuitry employs protection from RF and spurious emissions from cell phones and wireless GSM devices.
The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on-off switch.
Manufactured with very high standards and tight tolerances, the MG18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories.
The MG18 operate on phantom power of 18 - 52 Volts and are available in non-reflective black matte finish.
Key Features
- Natural accurate sound
- Modular threaded capsule
- Low noise electronics, dual ircuitry, internally balanced
- RF Immunity
- Low profile design
- Tension fit design for stable positioning
Technical Specifications
Transducer Type
Pre polarized condenser
Frequency Response
60 Hz - 19 kHz
Polar Pattern
Cardioid
Output Impedance
150 ohms balanced
Sensitivity
32 mV / Pa @ 1k
Equivalent Noise Level
22 dB (A weighted)
Signal to Noise Ratio
72 dB
Power Requirements
18 - 52 volts phantom
Maximum SPL
>= 130 dB
Dynamic Range
108 dB
Cable/Connector
3 pin gold plated
Male XLR connector
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing/Finish
Machined Brass / Black matte
Weight
4.73 ounces
Length
22.4 inches
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
