Christie HD14K-M 14000 Lumens 3DLP Dual Lamp HD Projector without Lens

Christie HD14K-M 14000 Lumens 3DLP Dual Lamp HD Projector without Lens

With a class leading compact form factor, the Christie HD14K-M projector provides high-performance and feature-rich options that you have come to expect in all Christie products. With embedded warping, blending and color matching, portrait capabilities and a wide variety of high-quality lenses that use our Intelligent Lens System (ILS), the M series provides extensive installation flexibility for any application.

At 14,000 lumens, the Christie HD14K-M also offers high efficiency by giving you more brightness while using less power for a low cost of ownership. Combined with a 3-year warranty and our industry-leading service and support, the M Series offers performance and peace of mind.

Key Features

• Contrast aperture provides variable contrast ratio from 2500-10000:1 (Full on/off) for crisp, detailed images.
• LiteLOC - Advanced variable lamp output for color matching across multiple screens
• Comprehensive Color Adjustment (CCA) - Individually adjust each RGB channel for even color matching
• Embedded Christie Twist image warping and edge-blending
• Multi-windowing and screen processing (up to a 2x3 array)
• Intelligent Lens System (ILS) providing motorized zoom, focus, horizontal and vertical offset
• Digital keystone correction
• Two high definition input channels that allow 4:4:4 HD signals
• 3D upgradable

Technical Specifications

ISO lumens
14,062
Center lumens
13,500
ANSI lumens
12,500
Contrast ratio
10,000:1
Display type
0.95" 3DLP
Digital micromirror device
3DLP - 3 x DMD
Resolution
HD (1920 x 1080)
Illumination type
Dual 450W lamp
Illumination performance (hrs)
Standard: 1,750 hours, Eco mode: 2,000 hours
Orientation
Portrait OR 360 vertically
Scan rates
Horizontal: 15 to 120 kHz Vertical: 23.97 to 150 Hz
Pixel clock rate
165MHz
Standard inputs
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Optional inputs
Dual-link DVI
Dual 3G SD/HD-SDI
Twin HDMI w/Active loop through
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Input signals
HDTV formats VGA through to QXGA (2048 x 1536)
Accepts all current HDTV/DTV formats
Multistandard video decoder
Horizontal and vertical scaling, all inputs
Control and networking
RS232 in/out
RS422 in
Ethernet (10/100)
USB
GPIO (RS232 9-pin male connector)
Built-in backlit LCD keypad
Remote control (with optional wired XLR connection)
Optical system
Dust-sealed, 3-chip, DMD light engine
Scheimpflug (tilt) adjustment
Built-in light shutter
Motorized horizontal and vertical lens offset
Tool-free lens insertion system
Fixed lenses
0.67:1 ILS lens
1.1:1 ILS lens
Zoom lenses
1.16-1.49:1 ILS lens
1.4-1.8:1 ILS lens
1.8-2.6:1 ILS lens
2.6-4.1:1 ILS lens
4.1-6.9:1 ILS lens
6.9-10.4:1 ILS lens
Lens offsets
+/- 120% Vertical
+/- 54% Horizontal
ALL LENSES EXCEPT BELOW
0.67:1 (-35%V / -12%H)
1.16-1.49:1 (-102%V / -40%H)
Standard accessories
IR remote
Line cord
Enhanced feature sets
99 channel memories
Black level blending
Auto setup
Digital keystone correction
3D upgradable
Dust sealed engine, filter-free design - Although the unit can be run without filters, Christie recommends using filters for assured performance
Menus in five languages
Operating voltage
110-240 VAC 50/60 Hz
Operating current
15A @ 100 VAC
Power requirements
110-240 VAC 50/60 Hz operating voltage
15 A @100V operating current
1500W power consumption
5118 BTU/hr dissipation
Dimensions (LxWxH)
22.1"x 19.7"x 10.2"
561mm x 500mm x 259mm
Weight
55lbs (25kg)
Operating environment
Temp: 40 to 104 F (5 to 40 C)
Humidity: 20-80% non-condensing
Regulatory approvals
UL/CSA/IEC 60950 (3rd edition)
FCC Class A, CE, CCC
This product conforms to all relevant European directives, standards, safety, health and environmental concerns
RoHS, WEEE
Limited warranty
Three years parts and labor (including light engine)