Clear-Com HMS-4X | 4 Channel Digital HelixNet Main Station

SKU: CLE-CNTLR-HMS4X Category:
Clear-Com

Condition: New

$4,910.00

Digital Network Partyline Main Station Provides 12 Networked Audio Channels

The HMS-4X is a 1RU digital partyline main station that provides power and up to 12 networked channels of audio. A single Main Station can support up to 20 digital beltpacks on a single shielded twisted-pair cable.

Key Features

  • High Channel Density. Four independent intercom channels and power for beltpacks transmitted over shielded twisted-pair (Ex. microphone cable, CAT5, or CAT6 cable).
  • No Rewiring Required. System designed to preserve investment by operating on shielded existing infrastructure.
  • Single Cable Operation. Fewer cables save time and cost during setup and configuration.
  • No Hum. No Buzz. All-digital system offers immunity to electro-magnetic interference and ground loops.
  • High User Capacity. Connect up to 20 beltpacks on a single HMS-4X Main Station across four channels.
  • Quick Startup. Get up-and-running fast and effortlessly with easy plug-and-go installation and hardware auto-discovery.
  • Seamless Interfacing. Optional two-wire and four-wire modules interface with existing analog intercom systems and audio devices.
  • Easy-to-Navigate Menu. Quick access to system settings and configuration for fast and painless set up.
  • Easy Updates. Apply firmware maintenance and upgrades easily via USB ports.

Technical Specifications

Channels
Four intercom channels
Program Audio (Assignable to intercom channels)
Connectors
Intercom Line
(2) 3-pin XLRM-F loop thru
Headset
4-pin XLR??M
USB
Type A & Micro AB
Program
3-pin XLR??F
SA (Stage Announce)
3-pin XLR??M
Hot Mic / IFB Interface
1/4″ (0.64 cm) phone jack
GPI
25 way D-type female
Microphone Pre-amplifier
Headset Mic Impedance
200 OHMS (Dynamic)
Headset Mic Voltage
1.7V (Electret selectable)
Limiter
+23dB
The following specified for a route to four-wire output at 0dBu out:
Mic Gain
60dB (Dynamic), 45dB (Electret)
Frequency Response
300Hz ?? 10 kHz ±3dB
Contoured for Intelligibility
Distortion
<0.2% THD @ 1kHz
Noise
<-55dBu (Dynamic), <-65dBu (Electret)
Headphone Amplifier
Load Impedance
>32 OHMS
Output Level
+12dBu before clipping
Sidetone
-12dBu (selectable)
The following specified for a route from a four-wire input at 0dBu in:
Max Gain
0dB
Frequency Response
40Hz – 10kHz ±3dB
Distortion
<0.1% THD @ 1kHz
Noise
<-65dBu
Headphone Limiter
0dBu (selectable)
Loudspeaker Amplifier
Load Impedance
8 OHMS
Output Level
+18dBu before clipping
The following specified for a route from a four-wire intput at 0dBu in:
Max Gain
18dB
Frequency Response
200Hz – 10kHz ±3dB
Distortion
<0.1% THD @ 1kHz
Noise
<-50dBu
Program Line Input
Maximum Level Before Clipping
18dBu
Nominal Input Level
0dBu (selectable)
Input Impedance
>= 10K OHMS
The following specified for a route to four-wire output at 0dBu out:
Frequency Response
20Hz – 10kHz ±3dB
Distortion
<0.2% THD @ 1kHz
Noise
<-65dBu
Stage Announcer Output
Maximum Level Before Clipping
18dBu
Nominal Output Level
0dBu (selectable)
Output Impedance
<= 100 OHMS
The following specified for a route from a dynamic headset:
Frequency Response
300Hz – 12kHz ±3dB
Distortion
<0.1% THD @ 1kHz
Noise
<-55dBu
Hot Mic Output
Maximum Level Before Clipping
12dBu
Nominal Output Level
0dBu (selectable)
Output Impedance
<= 100 OHMS
The following specified for a route from a dynamic headset:
Frequency Response
300Hz – 12kHz ±3dB
Distortion
<0.2% THD @ 1kHz
Noise
<-55dBu
Main Power
Input Voltage Range
100 – 240VAC
Input Frequency Range
50 – 60Hz
Input Power
<= 250VAC
Output Voltage
+/-29VDC ± 1V
Output Current per Channel
1.5A (continuous)
Power Connector
IEC60320-1-C14
Environmental
Max temperature is 40ºC (104ºF)
0 – 90% relative humidity
Dimensions
19″ W x 1.75″ H x 13″ D (483mm x 44mm x 320mm)
Weight
5.83 lbs (2.65 kg)

SKU: CLE-CNTLR-HMS4X Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Clear-Com HMS-4X | 4 Channel Digital HelixNet Main Station”

There are no reviews yet.