Digigram PYKO OUT Stereo IP Audio Decoder

SKU: DIGI-PYKOOUT-VB1982A0101 Category:
Brand: Digigram

$549.00

Key Workflow: audio over IP decoder for entry range studio to transmitter links (STL), as well as paging, background music, and live announcement applications

PYKO-out is a small form factor rack-mountable stereo IP audio decoder. It features two balanced analog mono outputs and a USB port for storing local playlists on a USB memory stick. It decodes standard RTP streams in G711, G722, PCM, MPEG L3, or AAC-LC and HE AAC audio formats and allows for auxiliary data tunneling (serial data, and 4 GPI statuses). PYKO-out also offers three decoding priorities with automatic failover, and can be remotely controlled through ASCII commands sent through TCP.

Stereo IP audio decoder
Decoding of standard RTP streams and WEB radio streams (Icecast/Shoutcast)
USB port for storing local playlists on a USB memory stick for local backup
Three decoding priorities with automatic failover
Control and monitoring through WEB pages, ASCII commands over TCP, and monitoring via SNMP

Key Features

  • Two balanced analog outputs (+18 dBu)
  • One 10/100 Mbits/s Ethernet RJ-45 port
  • Supports the following audio formats: G711, G722, PCM, MPEG L3, and AAC-LC and HE AAC at 32 kHz
  • Standard RTP streaming, or Icecast/Shoutcast
  • Auxiliary data tunneling (serial data through RS232 port, 4 GPIOs)
  • Unicast, multicast, multi-unicast and multi-multicast (up to six destinations)
  • Configuration and monitoring from WEB pages, or through ASCII commands via TCP
  • Possibility to start/stop the stream via GPIs
  • Front panel headphones mini-jack
  • External power supply

Technical Specifications

Configuration
Size 140mm x 41mm x 145mm (3 in a 1U rack)
Weight 434 g 477 g
Operating temperature / humidity: 0??C to 55??C / 0% to 70% relative humidity, non condensing
Power supply : 24VDC +/-20%
Outputs
Analog line outputs: 1 stereo
Maximum output level / impedance: +4 dBu / +18 dBu / < 100 ohms
Frequency response : 0/-2 dB <20-20000Hz>
THD+Noise: < – 84 dB @ -2dBFS <20-20000Hz>
SNR: <- 98 dB <20-20000Hz>
Headphone out: 1 (3.5 mm Jack)
Connectors
Ethernet Port: 10/100 Mbit Ethernet (RJ45)
RS232: subD 9pin male
USB: external and internal USB1.1 interface for memory key (FAT16*)
GPIO:
– 4 GPO , 4 independant contact relay,
– 4 GPI , TTL input 5v/5mA overvoltage and EMC protections
Software, format, protocols
IP Stream format: RTP, shoutcast, icecast
Audio formats:
– MP3 (variable bit rates up to 320 kBit)
– AAC LC, HE-AACv1 (limited to 32 kHz), HE AACv2 (limited to 32 kHz)
– G.711(??Law/aLaw at 8 kHz)
– PCM (16bit at 8 to 48 kHz)
Management
html pages via built-in web server
TCP/UDP ASCII commands to control the device through the network
Audio-ManagerVu middleware
Networks protocols
HTTP, TCP/UDP commands, RTP, DHCP, DNS, IGMP

SKU: DIGI-PYKOOUT-VB1982A0101 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digigram PYKO OUT Stereo IP Audio Decoder”

There are no reviews yet.