Free shipping on orders above $99* Details

Same-day Shipping for most orders before 10AM PST

Trusted by Professionals Since 1991

DPA  |  SKU: DPA-4018VNSE2

DPA 4018V-N-SE2 d:facto Softboost Supercardioid Handheld Microphone Capsule, Nickel, SE2-ew Adapter Compatible with Sennheiser 2000/6000/9000/evolution/D1 Transmitters

$1,32000
Shipping calculated at checkout.

Condition: New



Description

DPA 4018V-N-SE2 d:facto Softboost Supercardioid Handheld Microphone Capsule, Nickel, SE2-ew Adapter Compatible with Sennheiser 2000/6000/9000/evolution/D1 Transmitters

The d:facto series brings true studio sound to the live stage and broadcasting studio. These mics are available in an extremely linear version as well as in a version with a high-end boost. The modular nature of the d:facto series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.

Key Features

  • Extraordinarily natural sound
  • Perfectly uniform supercardioid directionality
  • High separation
  • Extreme SPL handling
  • Low handling noise
  • Sleek design
  • Flexible adapter system fits most professional wireless systems

Technical Specifications

Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz
Frequency range, +/-2 dB, at 12 cm (4.7 in)
100 Hz - 16 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, +/-2 dB at 1 kHz
5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 19 dB(A) re. 20 uPa (max. 21 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 75 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 120 dB
Max. SPL, peak before clipping
160 dB
Output impedance
100 OHM
Minimum load impedance
1 kOHM
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 50 dB at 1 kHz
Power supply (for full performance)
48 V Phantom power (+/- 4 V)
Current consumption
Max. 2 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight
309 g (10.9 oz)
Microphone diameter
52 mm (2.05 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
205 mm (8.1 in)
Maximum output voltage, RMS
8 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40 deg C to 45 deg C (-40 deg F to 113 deg F)
Relative humidity (RH)
Up to 90%

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

DPA

DPA 4018V-N-SE2 d:facto Softboost Supercardioid Handheld Microphone Capsule, Nickel, SE2-ew Adapter Compatible with Sennheiser 2000/6000/9000/evolution/D1 Transmitters

$1,32000

DPA 4018V-N-SE2 d:facto Softboost Supercardioid Handheld Microphone Capsule, Nickel, SE2-ew Adapter Compatible with Sennheiser 2000/6000/9000/evolution/D1 Transmitters

The d:facto series brings true studio sound to the live stage and broadcasting studio. These mics are available in an extremely linear version as well as in a version with a high-end boost. The modular nature of the d:facto series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.

Key Features

Technical Specifications

Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz
Frequency range, +/-2 dB, at 12 cm (4.7 in)
100 Hz - 16 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, +/-2 dB at 1 kHz
5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 19 dB(A) re. 20 uPa (max. 21 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 75 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 120 dB
Max. SPL, peak before clipping
160 dB
Output impedance
100 OHM
Minimum load impedance
1 kOHM
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 50 dB at 1 kHz
Power supply (for full performance)
48 V Phantom power (+/- 4 V)
Current consumption
Max. 2 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight
309 g (10.9 oz)
Microphone diameter
52 mm (2.05 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
205 mm (8.1 in)
Maximum output voltage, RMS
8 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40 deg C to 45 deg C (-40 deg F to 113 deg F)
Relative humidity (RH)
Up to 90%

View product