Dynaudio M3XE Studio Main Active Monitor System, Left

SKU: DYN-M3VELEFT-944236 Category:
Brand: Dynaudio

  • Three-Way Main Monitor
  • Handcrafted drivers
  • For in-wall or free-standing setups

$9,500.00

The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz – 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.

Key Features

  • Three-Way Main Monitor
  • Handcrafted drivers
  • For in-wall or free-standing setups
  • Passive MF/HF crossover
  • Matched with Lab.gruppen PLM 12k44 amplifier
  • Made in Denmark

Technical Specifications

System
3-way Active Main Monitor
Frequency Response (?3dB)
22Hz – 21kHz
Peak SPL 1m, pair (IEC Short Term)
> 133dB peak
Amplifier minimum
2 x Lab.gruppen PLM10000Q
Resonance Frequency
24Hz
Internal Cabinet Volume
145 liters
Bass Principle
Bass reflex
Amplifier
1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
Tweeter
Esotar 28mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
Midranges
15cm with 75mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
Woofer
Esotar 30cm with 75mm diameter pure copper wire voice-coil, MSP-cone, long stroke
Weight
65kg
Dimensions (WxHxL)
555 x 775 x 505mm
Cabinet
25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
Crossover
Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.
Model
12k44
Number of amplifier channels
4
Max out Power per Channel (4 ohms, all channels driven)
3000W
THD + N at 1kHz and 1dB below clipping
< 0.04 %
Dynamic Range
> 114dB
Channel separation (Crosstalk) at 1 kHz
> 70dB
Inputs
Analog, AES/EBU & Dante
Analog Input Sample Rate / Resolution
96kHz / 24bit
Weight
16.5kg (36lbs)
Dimensions (W x H x D)
483 (19”) x 88 (2 U) x 424(16”)

SKU: DYN-M3VELEFT-944236 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Dynaudio M3XE Studio Main Active Monitor System, Left”

There are no reviews yet.