Imagine Selenio X100-1RU-2PS Intelligent Dual-Channel Frame Synchronizer

SKU: IMAG-X1001RU2PS Category:

$4,600.00

Backordered until August 29, 2022

X100-1RU-2PS is a 1RU dual channel intelligent frame synch and convertor with advanced audio processing. The powerful, energy efficient X100-1RU-2PS is perfect for mobile rigs, production trucks, and production studios featuring a wide array of analog and digital real time baseband video and audio processing capabilities supporting SD and HD formats. It has a built in 3 Gb/s 1080p level and A level B-DL processor and web server to easily intergrate into your workflow. The X100 provides two 16 channel SDI de-embedders, 16 AES input or output ports, 8 channel input and output analog audio interfaces and a 32 channel internal audio processor. Future proofed for 10 Gigabit Ethernet (10 gigE) uncompressed broadband over IP and UHD-1 Ultra-HD ensuru=ing support for the next generation of television and production systems.

Key Features

  • Animated logo generator/inserter (1/9th screen size) with up to 80 seconds for 1080p, 160 seconds for 1080i/720p, 900 seconds for 480i/576i)
  • Program delay with up to 20 seconds for 1080p, 40 seconds for 1080i/720p, 220 seconds for 480i/576i
  • Dolby Digital Plus codecs and RTLL Real Time Loudness Control
  • Video thumbnails support for the input and output of the 2 processing channels
  • Insertion of closed captioning data from serial port
  • Support continuous numbering of SCTE-104 messages (remap mode) when mixing messages from GPI trigger and embedded SCTE-104 packets
  • Support for more SFPs (Dual channel HD-BNC inputs and outputs, combination of HD-BNC and optical Input and output, SD/HD to DVI Converter, SD/HD to HDMI Converter)
  • Intelligent dual-channel frame sync/delay, proc amp, noise reduction, clipping and color correction
  • Support for all 1080p/psf production formats (23.98, 24, 25, 29.97, 30)
  • True optional dual-channel processing for analog video
  • Data Wrangler VANC processing for known and unknown data types
  • Rules Engine for custom signal flow management
  • Fast frame sync, fast conversion, delay (lock to one input), program delay and time base corrector (TBC) modes
  • Advanced 3D adaptive 10-bit motion detection for up/down/cross/aspect ratio conversion
  • Basic frame rate conversion built-in and optional single-channel linear frame rate conversion
  • Two switchable auto-sensing 3G/HD/SD inputs
  • Dual up/down/cross/aspect/basic ratio conversion
  • Noise reduction (mosquito and block), sharpness and texture controls
  • Two aspect ratio converters with full control over H/V size and position with AFD support
  • Built-in video test and audio tone generators
  • Redundant power supplies
  • Dual logo generator/inserters
  • Static built-in, can be used for a trouble slide
  • Optional 1/9 screen animated logos
  • I-Wings side bar insertion when upconverting
  • Audio de-embed/embed, sync, delay, gain, invert and delay with 32 channels (eight groups) processing
  • PCM and non-PCM (Dolbyr Digital Plus, Dolbyr Digital, Dolbyr E) passthrough
  • Options for Dolbyr Digital Plus, Dolbyr Digital, Dolbyr E decode and encode (up to 2 Dolby decoders and encoders)
  • Options for DTS Neural Surround Upmix, Downmix, Multimerge and DTS Neural Loudness Control

Technical Specifications

COMPOSITE VIDEO INPUT (X100 OPTAVIO REQUIRED)
Standard NTSC (SMPTE170M) PAL-B (ITU624-2) PAL-M
Connector HD-BNC
Quantization 12 bits (NTSC, PAL-B, PAL-M)
TBC mode: 8 bits (all standards)
Input level 1 V pk-pk
Impedance 75 ohms
Return Loss >40 dB, 0.1 to 6 MHz
Common Mode Range 5 V
CMRR 60 dB @ 50/60 Hz, 5 V pk–pk
Setup Level Range +/-7.5 IRE
Frequency Response +/-0.1 dB, 0.1 to 6 MHz
SNR 62 dB, typical
Y/C Gain Error <0.1 dB
Y/C Delay Error <10 ns
COMPONENT VIDEO INPUT (X100 OPTAVIO REQUIRED)
Format YPbPr (Betacam/SMPTE), RGB
Connector Amphenol HD-BNC
Quantization 12 bits
Input level 1 V pk–pk
Impedance 75 ohms
Return Loss >40 dB, 1 kHz to 6 MHz
SNR >60 dB
3G/HD/SD-SDI VIDEO INPUT
Number of inputs 2
Standard
3G: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
HD: SMPTE 274M, SMPTE 292M (1.485, 1.485/1.001 Gb/s)
SD: SMPTE 259M-C (270 Mb/s, 525/625 component video)
Connector HD-BNC
Impedance 75 ohms
Return Loss
>10 dB, typical, from 1485 to 2970 MHz
>15 dB, typical, from 5 to 1485 MHz
>20 dB, typical, from 5 to 270 MHz
Equalization
3G: Adaptive cable equalization for up to 492 ft (150 m), typical, of Belden 1694A coaxial cable
HD-SDI: Adaptive cable equalization for up to 607 ft (185 m) typical, of Belden 1694A coaxial cable
SD-SDI: Adaptive cable equalization for up to 1310 ft (400 m) typical, of Belden 8281 coaxial cable
FIBER VIDEO IN (VIA SFP PORT)
Number of Inputs 2
Standard
3G: SMPTE 424M
HD-SDI: SMPTE 292M
SD-SDI: SMPTE 259M
Connector LC
Laser Safety Level Class 1
AUDIO INPUT
Unbalanced AES Input
Number of Inputs 16, 14, 12 . 2 (shared with AES outputs, software configurable)
Connector HD-BNC
Impedance 75 ohms
Return Loss >25 dB, 0.1 to 6.0 MHz
Sensitivity <100 mV
Input Audio Sampling Rate 32 to 108 kHz
BALANCED AES INPUT (WITH EXTERNAL BALUN)
Number of Inputs 16, 14, 12 . 2 (shared with AES outputs, software configurable)
Connector XLR with external balun
Sensitivity <200 mV
Impedance 110 ohms +/-20% (0.1 to 6 MHz)
Maximum Input Signal 10 V pk-pk
Common Mode Rejection 0 V to 7 V (0 to 20 kHz)
Input Audio Rate 32 to 108 kHz

SKU: IMAG-X1001RU2PS Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Imagine Selenio X100-1RU-2PS Intelligent Dual-Channel Frame Synchronizer”

There are no reviews yet.