The JBL Control 65P/T-WH (White) is a compact full-range, two-way pendant-type loudspeaker that provides superb sound reproduction and very consistent, wide coverage for rooms with open architecture ceilings and other locations where a pendant form factor is desired. Combining a large 200 mm (8 in) diameter waveguide with low-frequency projection apertures, the two coaxially-mounted drivers provide a seamless integration of coverage, resulting in extremely even pattern control and coverage where all listeners hear a consistent, high-fidelity sound quality.
The wide 120Deg. coverage pattern allows for the use of fewer speakers, reducing the cost of the installed system without sacrificing performance. Excellent sound quality coupled with stylish design and easy installation makes the Control 65P/T ideal for a wide variety of applications including retail, restaurants, hotels, casinos, fitness centers, convention centers, exhibit spaces, conference rooms, atriums, museums, transit centers and other open-ceiling applications. The Control 65P/T includes a single-point mounting system for easy and secure suspension in open-ceiling applications. Two complete hanging cable systems are included, providing both main and safety suspension cables.
Includes are extra-long 4.5 m (15 feet) high tensile galvanized steel wire rope having spring clips for the loudspeaker end of the cable and UL listed cable fasteners for infinitely adjustable suspension height. The system’s 130 mm (51/4 in) low-frequency driver features a polypropylene-coated cone and 25 mm (1 in) copper voice coil with vented fiberglass resin coil-former for high power handling and improved long-term reliability. The coaxially-mounted 20 mm (3/4 in) textile soft dome high frequency driver features internal damping for smooth extended response, along with an aluminum voice coil former and neodymium magnet assembly with ferro fluid cooling, for high-fidelity sound quality with enhanced long-term sound level capability.
The Control 65P/T contains a high-quality 60 Watt multi-tap transformer for use on 70V/100V distributed loudspeaker lines and is switchable for 8-ohm voice-coil direct operation. Euro-style clip-in connectors allow for easy wiring. For protected outdoor applications, rubber boots are included to cover the input connectors and an optional terminal cover is available for harsher locations.
- High-quality audio in a compact design
- The 5.25″ woofer and a silk-dome tweeter deliver full-range audio with a wide frequency response, ideal for music or speech applications
- Full grille protects the driver and gives the speaker a sleek look
- JBL’s exclusive Radiation Boundary Integration (RBI) technology provides 120deg. of consistent conical coverage
- 75W power handling capability and an 8 ohm impedance for compatibility with a variety of installation sound systems
- 60W multi-tap transformer
Frequency Response (-10 dB)
55 Hz – 20 kHz
Frequency Range (±3 dB)
78 Hz – 18 kHz
75 Watts Continuous Pink Noise Power (with 300 Watts peaks)
150 Watts Continuous Program Power
Nominal Coverage Angle
Directivity Index (DI)
Rated Maximum SPL @ 1m
105 dB continuous pink noise, 111 dB peak
70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
Transformer Insertion Loss
0.5 dB @ 7.5 W, 0.5 dB @ 15 W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
LF Driver 130 mm (51/4 in) polypropylene-coated paper with pure butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil-former
HF Driver 20 mm (3/4 in) textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
High impact polystyrene
Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating
Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included
Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
Dimensions (Diameter x Height)
234 x 259 mm (9.3 x 10.2 in) to top of cabinet. 279 mm (11.0 in) to top of suspension bracket
3.7 kg (8 lbs)