K-Array Azimut-KAMUT2L Sound System with 2 KZ14-AZ, 1 KU44-2, 1 KA02, 1 K-REMUCTRL, Black

SKU: KRY-KAMUT2L Category:
Brand: K-Array

$4,080.43

The Aziumt-KAMUT2L is a complete system composed of two 10cm-long Lyzard-KZ14 loudspeakers in Anticorodal aluminum, an ultra-compact stainless-steel Rumble-KU44-2 subwoofer easy for hiding in plain sight and a 144x144x46cm (5.7×5.7×1.8in) Kommander-KA02 amplifier with remote control.

A look book of our work around the world to inspire your knowledge of innovative audio solutions for a wide variety of applications featuring K-array technology.

Technical Specifications

LYZARD-KZ14
GENERAL
Type
Line array
Transducers
4 x 0.5” neodymium magnet woofers
Frequency Response
500 Hz – 18 kHz (-6 dB) (1)
Max SPL
98 dB (peak) (2)
Rated Power
15 W
Coverage
V. 40 Degrees | H. 140 Degrees
Connectors
IN+ IN- screw terminals
Nominal Impedance
16 OHMS
Disclaimer
Passive loudspeakers require dedicated preset loaded on board of K-array amplifiers.
Disclaimer
New materials and design are introduced into existing products without previous notice.
HANDLING AND FINISHES
Dimensions (W x H x D)
22 x 100 x 11 mm (0.9 x 3.9 x 0.4 in)
Weight
0.059 kg (0.130 lb)
Material
Aluminum
Colors
Black, White, Custom RAL
Finishes
24K Gold, Polished, Brushed
REGULATIONS
IP Rating
IP64
(1) With dedicated preset.
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
RUMBLE-KU44 I
GENERAL
Type
Passive subwoofer
Transducers
2 x 4” neodymium magnet woofers
2 x 4” passive radiators
Frequency Response
45 Hz – 150 / 500 Hz (-6 dB) (1)
Max SPL
116 dB (peak) (2)
Rated Power
120 W
Coverage
Omni
Connectors
4PIN euroblock connector (included)
Nominal Impedance
8 OHMS / 32 OHMS selectable
HANDLING AND FINISHES
Dimensions (W x H x D)
500 x 116 x 100 mm (19.7 x 4.6 x 4.0 in) (3)
Weight
5.9 kg (13.0 lb)
Material
Stainless Steel
Colors
Black, White, Custom RAL
Finishes
24K Gold, Polished, Brushed
REGULATIONS
IP Rating
IP64 (4)
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
(3) Removable rubber feet not included.
(4) More complete water protection with K-KUIP4 accessory.
Passive loudspeakers require dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
KOMMANDER-KA02
GENERAL
Type
4ch switching mode, Class D Amplifier
Output Power
4x 50W @ 4OHMS (1)
Impedance
minimum 4 OHMS (2 OHMS PBTL)
Frequency Response
20 Hz – 20 kHz (±1 dB)
Connections
3.5 mm jack unBAL analog stereo input,
2x BAL input: Phoenix MC 1.5/ 3-ST-3.81,
TOSLINK optical input,
4x user selectable GPIO,
4x USB-A 2.0,
1x RJ45 Ethernet,
Bluetooth 4.1 Low Energy
Wi-Fi IEEE 802.11 b/g/n
Built-in DSP
Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets
Remote Control
Wi-Fi and Ethernet dedicated APP and Desktop software
POWER HANDLING
Protections
Thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter.
MAIN Operating Range
Dedicated AC/DC power adapter 100-240V ~ AC, 50-60 Hz input / 24 V, 4 A DC output
Power Consumption
20 W @ 4 OHMS load, 1/8 Rated Power (Pink Noise)
HANDLING AND FINISHES
Colors
Black
Material
Aluminum
Dimensions (W x H x D)
144 x 46 x 144 mm (5.7 x 1.8 x 5.7 in)
IP Rating
0.5 kg (1.1 lb)
REGULATIONS
IP Rating
IP20
(1) CTA-2006 Standard single channel driven
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.

SKU: KRY-KAMUT2L Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “K-Array Azimut-KAMUT2L Sound System with 2 KZ14-AZ, 1 KU44-2, 1 KA02, 1 K-REMUCTRL, Black”

There are no reviews yet.