K-Array Azimut-KAMUT2L1 Sound System with 2 KZ1, 1 KTR24, 1 KA02, 1 K-REMUCTRL, White

SKU: KRY-KAMUT2L1W Category:
Brand: K-Array

$3,189.63

The most inconspicuous system is the Azimut-KAMUT2L1 composed of two impossibly mini-3.7-cm-longLyzard-KZ1 loudspeakers, an ultra-compact Truffle-KTR24 subwoofer, a 144x144x26mm (5.7×5.7×1.8in) Kommander-KA02 amplifier and a covert remote control. The Azimut-KAMUT2L1 is designed for discreet use in a variety of intimate environments where high-quality background music is needed in a compact form, such as museums and small retail stores.

A look book of our work around the world to inspire your knowledge of innovative audio solutions for a wide variety of applications featuring K-array technology.

Technical Specifications

LYZARD-KZ1
GENERAL
Type
Point source
Transducers
0.5” neodymium magnet woofer
Frequency Response
500 Hz – 18 kHz (-6 dB) (1)
Max SPL
86 dB (peak) (2)
Rated Power
3.5 W
Coverage
V. 140 Degrees | H. 140 Degrees
Connectors
IN+ IN- screw terminals
Nominal Impedance
16 OHMS
HANDLING AND FINISHES
Dimensions (W x H x D)
22 x 37 x 11 mm (0.9 x 1.5 x 0.4 in)
Weight
0.021 kg (0.046 lb)
Material
Aluminum
Colors
Black, White, Custom RAL
Finishes
24K Gold, Polished, Brushed
REGULATIONS
IP Rating
IP64
(1) With dedicated preset.
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m
Passive loudspeakers require dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
TRUFFLE-KTR24
GENERAL
Type
Passive subwoofer
Transducers
4” woofer + passive radiator
Frequency Response
45 Hz – 150 / 500 Hz (-6 dB) (1)
Max SPL
112 dB (peak) (2)
Rated Power
60 W
Coverage
Omni
Connectors
2PIN euroblock connector (included)
Nominal Impedance
4 OHMS
HANDLING AND FINISHES
Dimensions (W x H x D)
122 x 117 x 199 mm (4.8 x 4.6 x 7.8 in)
Weight
1.5 kg (3.31 lb)
Material
Aluminum
Colors
Black
Finishes
Powder Matte
REGULATIONS
IP Rating
IP64
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
Passive loudspeakers require dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
KOMMANDER-KA02
GENERAL
Type
4ch switching mode, Class D Amplifier
Output Power
4x 50W @ 4OHMS (1)
Impedance
minimum 4 OHMS (2 OHMS PBTL)
Frequency Response
20 Hz – 20 kHz (±1 dB)
Connections
3.5 mm jack unBAL analog stereo input,
2x BAL input: Phoenix MC 1.5/ 3-ST-3.81,
TOSLINK optical input,
4x user selectable GPIO,
4x USB-A 2.0,
1x RJ45 Ethernet,
Bluetooth 4.1 Low Energy
Wi-Fi IEEE 802.11 b/g/n
Built-in DSP
Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets
Remote Control
Wi-Fi and Ethernet dedicated APP and Desktop software
POWER HANDLING
Protections
Thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter.
MAIN Operating Range
Dedicated AC/DC power adapter 100-240V ~ AC, 50-60 Hz input / 24 V, 4 A DC output
Power Consumption
20 W @ 4 OHMS load, 1/8 Rated Power (Pink Noise)
HANDLING AND FINISHES
Colors
Black
Material
Aluminum
Dimensions (W x H x D)
144 x 46 x 144 mm (5.7 x 1.8 x 5.7 in)
IP Rating
0.5 kg (1.1 lb)
REGULATIONS
IP Rating
IP20
(1) CTA-2006 Standard single channel driven
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.

SKU: KRY-KAMUT2L1W Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “K-Array Azimut-KAMUT2L1 Sound System with 2 KZ1, 1 KTR24, 1 KA02, 1 K-REMUCTRL, White”

There are no reviews yet.