Luminex GigaCore 26i Install 24-Port and 6-SFP Port Gigabit Ethernet Switch

Luminex GigaCore 26i Install 24-Port and 6-SFP Port Gigabit Ethernet Switch

The Luminex GigaCore 26i is a Gigabit Ethernet switch providing a budget friendly solution when port density matters. The unit comes with all the advanced functionalities of the GigaCore Ethernet switches range, in a fully AV-installation oriented package. The unit offers 26 Gigabit ports that are all connected on the front panel. Each port on the switch will have coloured mode led indications which will indicate different properties of the port such as: PoE, redundancy and group membership.

Key Features

• Tailored for AV industry: Pre-configured settings that are common in the AV industry, such as QoS and IGMP snooping.
• Easy set-up: Easy group function with pre-configured VLAN’s for a quick set-up (without IT knowledge).
• Ideal for fixed installations: Designed for fixed installations in buildings, theaters, cruise ships, theme parks
• Converged networking: Transfer multiple protocols (Dante, RAVENNA/AES67, ArtNet, MANet 1&2, sACN,Q-LAN)
• Ultimate link redundancy: RlinkX redundancy protocol automatically takes over signal in milliseconds in case of a link failure.

Technical Specifications

Most suitable applications
Fixed installations
RLinkX (Link redundancy)
Yes
Groups (VLAN segmentation)
Yes
MultiLinkX (Link aggregation)
Yes
Profile manager
Yes
Memory
4Mb
MAC adress table
8192 Entries
Address learning / Aging
Self learning, Auto aging
Switching throughput
52Gbps
IGMP support
Yes (V1/V2/V3)
IGMP snooping
Yes, enabled by default
Port sensing
Auto negotiation
Auto crossover
MDI / MDIX
Auto sensing
Full or Half Duplex (Gigabit is Full Duplex)
Ethernet connectivity
24 x RJ45 connectors (incl. 4x dual media on ports 21-24)
Fiber connectivity
6 x SFP cages (incl. 4x dual media on ports 21-24)
Ethernet port speed
1Gbps
Serial
1 x serial RJ45 console port
Power connectivity
1 x IEC inlet
1 x redundant power input on Molex Micro-Fit 14 pin connector
Power input
100-240VAC, 50-60Hz
Power consumption
Maximum 30W (maximum 430W with PoE Supply Unit)
Fuse
None
Backup power input
12VDC / 2,5A
Supported protocols
Dante, RAVENNA/AES67, Ethersound, Q-LAN, REAC, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), IEEE 1588 PTP V2
Sound protocol compliance
Yes (low jitter)
Ethernet compliance
IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
Display and jog
None
Configuration
Through the built-in web server
Status LEDs
Global status LEDs
Device, power, PoE power, RLinkX and mode
Port status LEDs
PoE, MultiLinkX, RLinkX, groups, link/activity and port speed
Dark mode available
Colored RGB LEDs
Yes
Mounting
Rack
Enclosure
Robust metal housing
Dimensions (W x D x H)
482 x 270,3 x 44 mm (19" x 10,6" x 1,73")
Weight
4 kg
Packaging
545 x 420 x 80 mm (21.5" x 16.5" x 3.15")
Environment
Operating temperature
0 to +50 C (non-PoE version), 0 to +40 C (PoE version)
Storage temperature
-10 to +70 C
Humidity (non condensing)
5 to 95% RH
Certificates/Approvals
cSGSus Mark, CE, CB certificate
Standards
IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55022, EN 55024