Nady PEM-1000 Wireless In-Ear Monitor System
Description
Description
Nady PEM-1000 Wireless In-Ear Monitor System
The Nady PEM-1000 offers all of the advantages of wireless in-ear monitoring - mobility, more focused audio, freedom from feedback, elimination of transport issues associated with conventional floor monitors as well as the long-term health benefits of safe listening levels. For the first time, a wireless in-ear monitor system combines state-of-the-art advanced frequency synthesized UHF technology, high-end performance, ease of use, and unprecedented affordability. The PEM-1000 offers a choice of 100 user selectable UHF channels for the transmitter and receiver(s), as well as stereo (MPX system) or mono mode transmission. This system is a must-have for live-stage music performance, and is loaded with features previously found only in units costing several times more.
Key Features
- Available on selected frequency bands within the UHF band for interferencefree, long-range performance (up to 8 systems can be operated simultaneously, depending on country and frequency band)
- System consists of PEM-1000T transmitter and one bodypack PEM1000R receiver, both of which offer 100 channels user select-ability. Any number of additional receivers can also be operated with the same transmitter if they are all set to the same channel.
- AUTO-SCAN on receiver unit for easily locating clear channels or manual chose Group/Channel on transmitter
- IR (Infrared) synchronization both ways interface between receiver and transmitter
- User-friendly menu operation with more control options shown in LCD display
- Proprietary companding circuitry for wide Dynamic Range and clear, natural sound
- Operating Range: Up to 500 feet typical (depending on site conditions)
- Rugged, foam-padded traveling case provides easy, safe transport and storage
Technical Specifications
Operating Frequency Range
Band 1: 673MHz - 685.375MHz
Band 2: 583MHz - 607.750MHz
Modulation
Mono or stereo (MPX with pilot tone), FM: F3E - 25KHz, nominal
Audio Frequency Response
50 - 15,000Hz (-3dB)
T.H.D.
< 1%
Signal-To-Noise Ratio
> 80dB, with proprietary compounding noise reduction
Operating Range
Up to 500 feet typical (depending on site conditions)
PEM-1000T Transmitter
RF Output Power
100mW (Hi), 10mW (Lo), country dependent
Spurious Emission
> -55dBc
Frequency Stability
- 100PPM
Headphones Out Power
50mW max. @16 - 32
Input Impedance
750 (L/R Audio Line Inputs)
Nominal Input Level
0dBm
Max. Input Levels
+4dB/+10dB Selectable
Controls
Power ON/OFF, Menu buttons; headphones monitor volume control
Indicators
Power ON LED; Channel LCD and 5-segment L-R audio LED input displays
Antenna
wave rigid detachable, BNC mount
Power Requirement
External 12V/1000mA (110V-240V auto selection)
Dimension
8.27" x 9.1" x 1.75" (210mm x 231mm x 45mm)
Weight
2.98lbs (1.35kg)
PEM-1000R Receiver
Maximum Audio Output Level
80mW max, 5mW (Limiter ON) @16 - 32
RF Sensitivity
2.5uV (-100dB/12dB SINAD)
Squelch Threshold
< -90dB
Spurious Rejection
> 55dBc
Audio Output Connector
1/8" Stereo (Tip=left, Ring=Right, Sleeve=ground)
Indicators
Low Battery LCD (5 Bars), Signal ON (RED LED)
Power Requirements
2x 1.5V alkaline batteries
Current Drain
130mA - 260mA
Battery Life
Up to 8 hours, volume dependent
Antenna
External Flexible
Dimensions
4.5" x 0.9" x 2.6" (115mm x 23mm x 66mm)
Weight
2.85oz (80kg)
Warranty
1 Year Limited Warranty
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
