Net Prowler combines network testing (physical layer and link), cable verification, cable troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer.

Network Testing
Ping both IPV4 and IPV6 addresses
Test TCP/UDP throughput
Detects and reports advertised link speed and link duplex capability
Tests the presence of VLANs
CDP/LLDP/NDP and VLAN identification provides network configuration information
Ping specific URL to verify WAN connectivity
Blinks link light to identify location on a hub/switch/router port
Display network devices & associated IP Addresses

Cable Verification & Troubleshooting
The Net Prowler provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, miswires, split pairs, and reverses. The full-featured Net Prowler measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair or a selected pin.

PoE Voltage Testing
The Net Prowler enables quick identification of a network drops link capability and current link status. Net Prowler also Tests the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. These network tests can also be saved for record keeping and printing.

Key Features

• Display network devices & associated IP Addresses
• Test TCP/UDP throughput
• Ping both IPV4 and IPV6 addresses
• Tests the presence of VLANs
• CDP/LLDP/NDP and VLAN identification provides network configuration information
• Ping specific URL to verify WAN connectivity
• Blinks link light to identify location on a hub/switch/router port
• Tests and reports advertised and current link speed

Technical Specifications

Measurement Technology
Time Domain Reflectometry (TDR)
Cable Measurements
Cable Testing and ID up to 1000 ft (305 m)
Split Pair Detection 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement 0 to 1,500 ft (457 m), ± (5%+1 ft)
Supports 8 continuity and ID number remotes (RJ45)
Supports 20 RJ45 and 20 F connector ID only remotes
Power over Ethernet
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifi es Mode A or B (pairs with PoE)
Active Ethernet
Indicates advertised speeds of 10/100/1000base-T half or full duplex. Can link to network at 10/100base-T
Maximum Voltage
RJ Jack 66 VDC or 55 VAC
F Connector 50 VDC or VAC
Refers to the max voltage that can be applied to any 2 connector pins without damaging the tester
Save Test Results
Stores up to 250 cable or network tests with user defined names
Tone Generation
Tone Frequencies 730 Hz and 1440 Hz
Languages
English, French, Spanish
Battery Life
For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typically
Standby – 1.5 years typically
(200uA max standby current) Batteries are included
Altitude
10,000 ft (3048 m) operating
Temperature
Operating 32 to 122°F (0 to 50°C)
Storage -22 to +140°F (-30 to 60°C)
Humidity
10 to 90% non-condensing
Enclosure
High-strength PC/ABS plastic with V0 rating with boot
WIt’stands 4 foot drops onto concrete
Size
1.85″H x 3.6″W x 6.8″L (4.7 x 9.15 x 17.3 cm)
Weight With batteries
1 lb 2 oz (510 g)
Safety Compliances
CE
Warranty
1 Year
Item Includes
Net Prowler Main Unit
#1-5 Coax ID and Test Remote Set
#1-5 Data ID-only Remote Set
F Female to F Female Adapter F81
Network/Tel Test and ID Smart Remote #1
No-Fault Cables – Qty 2
Micro USB Cable
Hanging Pouch
Quick Start Guide
User Manual (Online)
Warranty Activation Card
6x Alkaline AA batteries
Warranty
1 Year