Radial PZ-DI Orchestral Instrument DI
Description
Description
Radial PZ-DI Orchestral Instrument DI
The PZ-DI is a high-performance specialized active direct box designed to accommodate acoustic and orchestral instruments, with a selectable input impedance that can accommodate magnetic pickups or piezo transducers, and a variable low-cut filter.
Piezo problem solver
The PZ-DI has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument's pickups. The 1 meg ohm position delivers the classic impedance found on most active DI boxes, while the 220k ohm setting warms up the tone of magnetic pickups to provide the feel and tone as if your instrument were connected directly to an amplifier. The third setting is an ultra-high 10 meg ohm impedance that is specifically designed for piezo transducers, helping compensate for the harsh or squawky tone that can occur when a piezo is connected to a lower impedance input.
Variable filter to suit any instrument
To remove unwanted resonance on stage and prevent feedback, the PZ-DI is equipped with a fully-variable low-cut filter that gently rolls off low frequencies. The roll-off point of this filter can be raised or lowered to match the frequency response of your instrument, with a lower point for acoustic bass and a higher setting for violin or banjo. A switchable high-cut filter is also included, which is useful on instruments such as acoustic guitars that incorporate a battery-powered preamp, softening any harshness or high frequency edge for a smoother tone.
Key Features
- Optimized for orchestral instruments on a live stage
- Adjustable load for piezo and magnetic pickups
- Variable low-cut filter to control low frequency resonance
- Powered by 48V phantom, no batteries required
Technical Specifications
Audio circuit type
Proprietary analog circuit with low-noise FET op-amp
Frequency response
20Hz ~ 20kHz
Dynamic range
105dB
Gain
+4.6dB
Total harmonic distortion
0.02%
Input Impedance
10M/1M/220K-Ohms
Output Impedance
200 Ohms - nominal
Equivalent Input Noise
-98dBu
Input Connectors
1/4" hi-Z input
Output Connectors
XLR male output
Construction
48V phantom - proprietary digital switching
Weight
1.2lb (0.54kg)
Shipping size (L x W x D)
127 x 84 x 48mm (5.0" x 3.3" x 2")
Power
48V phantom - proprietary digital switching
Conditions
For use in dry locations only between 5°C and 40°C
Warranty
Radial 3-year, transferable
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
