UHF 2-channel wireless beltpack.
- On/Off & Volume Control
Turns the beltpack power on and controls head set volume.
- Audio Channel Select Button
Allows user to select either audio channel A or B.
- Bat/Overmod Light (BAT/OM)
Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.
- Talk Light
LED is on when the talk button, SA or WTA is active.
1/4 Wave (supplied), Screw type, Replaceable TX and RX
140 mA Push-to-Talk, Talk On
1.65" (41.9 mm)
< 1 % at full deviation
300 Hz-8 kHz
5.05" (128.3 mm)
3 dB at 230 kHz
70 dB or better
Local Headset Output
40 mW output into 600W 1% distortion
Microphone Input Sensitivity
6 “AA” Cells Alkaline NiMH optional
RF Frequency Stability
< 0.7 uV for 12 dB SINAD
20 dB SINAD About 1.0 uV
-4 deg F to 130 deg F (-20 deg C to 55 deg C
Dual Conversion Super heterodyne, Synthesized, FM, 712 channels
16 oz (453.59 g)
3.75" (95.3 mm)