Shure QLXD124/CVL Wireless Bodypack and Handheld Vocal Combo System with CVL-B/C-TQG, J50A 572-608/614-616MHz

Shure QLXD124/CVL Wireless Bodypack and Handheld Vocal Combo System with CVL-B/C-TQG, J50A 572-608/614-616MHz

The QLXD124/CVL Handheld and Lavalier Combo Wireless Microphone System is part of the QLX-D wireless systems family. QLX-D delivers outstanding wireless functionality ideal for mid-size events and installations in businesses, hotels, and government offices with conferencing spaces; schools, houses of worship, and live performance spaces.

Note: Bodypack and handheld transmitters cannot be used simultaneously.

The Centraverse Lavalier (CVL) offers convenience and performance in an easy-to-use, clip-on cardioid condenser microphone that features simple, no-nonsense setup made for the presenting professional. Precision-engineered for years of use in any Shure wireless system, its compact size is ideal for presenting situations where visibility is a major concern. The unidirectional (cardioid) pickup pattern rejects unwanted noise for superior source quality and vocal reproduction. Precision-engineered for years of use in any Shure wireless systems, its compact size is ideal for presenting situations where visibility is a major concern. The unidirectional (cardioid) pickup pattern rejects unwanted sound for superior source quality and vocal reproduction.

Key Features

• Miniature clip-on lavalier microphone for low visibilty
• Permanently charged electret condenser element for clear vocal reproduction
• Unidirectional (cardioid) polar pattern rejects unwanted noise for improved sound quality
• Included tie clip allows hands-free use perfect for presenters
• TA4F (TQG) connector seamlessly integrates with Shure wireless bodypack systems
• Included windscreen reduces plosive, wind and breath sounds
• Tailored frequency response optimized for public speaking and presentation
• Legendary Shure precision engineering for durability and performance

Technical Specifications

Type
Electret Condenser
Frequency Response
50 to 20,000 Hz
Polar Pattern
Unidirectional (Cardioid)
Output Impedance @ 1 kHz, typical
600
Audio Output Level
-43.5 dBV/Pa
Signal-To-Noise Ratio @ 1 kHz
72 dB
Maximum SPL 1000 load, @ 3% THD
139.0 dB
Dynamic Range @ 1 kHz, 1000 load
117.0 dB
Equivalent Output Noise Typical, A-Weighted
22 dB
Power Requirements
+5 V DC (nominal), 10 V maximum (DC bias)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Cable
1.3 m (50 in.)
Connector
TA4F
Net Weight
25 g (0.88 oz.)
Includes
QLXD2/SM58, CVL-B/C-TQG, QLXD1, QLXD4, microphone clip, 2 zipper bags, 4 AA batteries, power supply, two 1/2 wave antennas, 2 BNC cables, 2 BNC bulkhead adapters, rackmount kit, and user guide

Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime @ 10 mW
Shure SB900: up to 10 hours
Alkaline: up to 9 hours
Dimensions
86 mm x 65 mm x 23 mm (3.38 in. x 2.57in. x 0.92 in.) H x W x D
Weight
138 g (4.9 oz.), without batteries
Housing
Cast aluminum
Audio Input Connector
4-pin male mini connector (TA4M)
Configuration
Unbalanced
Impedance
1 M ohm
Maximum Input Level
1 kHz at 1% THD
8.5 dBV (7.5 Vpp)
Preamplifier Equivalent Input Noise (EIN) System Gain Setting >= +20
120 dBV, A-weighted, typical-
RF Output Connector
SMA
Antenna Type
1/4 wave
Impedance
50 ohms
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW

Dimensions
41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D
Weight
777 g (1.71 lbs), without antennas
Housing
Steel
Power Requirements
12 V DC @ 0.4 A, supplied by external power supply (tip positive)
RF Input
Spurious Rejection
>80 dB, typical
Connector Type
BNC
Impedance
50 ohms
Audio Output
Gain Adjustment Range
-18 to +42 dB in 1 dB steps
Configuration
1/4 inch (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance
1/4 inch (6.35 mm): 100 OHM (50 OHM Unbalanced)
XLR: 100 OHM
Full Scale Output
1/4 inch (6.35 mm): +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Mic/Line Switch
30 dB pad
Phantom Power Protection
1/4 inch (6.35 mm): Yes
XLR: Yes
Networking
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Ethernet Cable Length
100 m (328 ft)