Studio Technologies Model 400-6R SDI-Over-Fiber Transport System, Receiver

Studio Technologies Model 400-6R SDI-Over-Fiber Transport System, Receiver

Studio Technologies Model 400-6R SDI-Over-Fiber Transport System is a high-performance, cost-effective, rack-mount solution for distributing digital video signals over short and medium distances. The system is compatible with all common broadcast serial digital video formats and is suitable for use in remote trucks, live-event video distribution, and fixed links associated with broadcast and production facilities. Several Model 400 versions are available, providing a range of input and output configurations.

Technology
The Model 400 System uses a novel hardware implementation to transport up to 12 SDI signals over four single-mode optical fibers. The Model 400-12T's 12 SDI inputs are arranged as four groups, with each group of three SDI signals being transported over one fiber at wavelengths of 1310, 1490, and 1550 nm. In typical applications the launch power is such that signals can be transported over a minimum distance of 10 kilometers.

SDI input signals can be SD (270 Mb/s), HD (1.485 Gb/s), or 3G (2.97 Gb/s). 3G signals can be in either Level A or Level B format. The inputs also support video signals in the DVB-ASI (270 Mb/s) format. Each of the Model 400's SDI input channels is independent, allowing any combination of rates/formats to be transported.

Associated with each Model 400 SDI input channel is a re-clocked and buffered loop-through output. These can be extremely useful, allowing a signal source to be routed to another input on the Model 400 or a related piece of equipment.

Typically, a Model 400-12R receives the four single-mode fiber signals that originate in a Model 400-12T. Each optical input is de-multiplexed into three optical channels which are converted into electrical signals. Each of these SDI signals are then re-clocked and sent to two independent SDI output drivers. As such, the Model 400-12R has 24 (12 pairs) of BNC output connectors.

Dual Power Capability
Model 400 units allow an AC mains source of 100-240 V, 50/60 Hz to be directly connected. They can also be DC powered using a 10-18-volt source that is connected via a broadcast-standard 4-pin XLR connector.

If both AC and DC power sources are connected to a Model 400, the unit will be powered by the AC mains supply. Only if the AC mains source fails will a load be placed on the DC source. This allows a source of DC, typically a battery pack, to serve in a backup capacity. With this arrangement normal SDI-over-fiber transport operation can continue even if AC mains power is lost.

Remote Monitoring and Configuration
The Model 400 has an embedded web server that allows the user to monitor system status through any web-enabled device such as a personal computer or smartphone. System status can also be communicated using SNMP, making it possible to integrate the unit's monitoring information into a networked alarm and control software application.

The Model 400's status screen lets a user or supervisor check for the presence of AC and DC power sources as well as individual SDI input channel status, signal rate, and whether the optical transmitters are enabled. The optical output power of each electrical-to-optical (E2O) channel is reported directly in dBm

The embedded web server also provides a configuration menu allowing a variety of monitoring parameters to be set. These include alarms for loss of AC or DC power, over-temperature, and low optical transmit and receive levels. Additional menu screens provide access to SNMP, network IP address, and front-panel display configurations.

Please Note: The M400-6R is the Receiver only!

Key Features

• Multi-channel electrical-to-optical (E2O) and optical-to-electrical (O2E) SDI transport
• Twelve format-independent SDI data paths over four single-mode optical fibers
• Supports 3G (SMPTE 424M), HD (SMPTE 292), and SD (SMPTE 259M) SDI, as well as DVB-ASI
• Fiber transport based on the SMPTE 297 standard
• Dual power capability: AC mains or DC; when both sources are present system is AC mains powered and DC supply acts as a backup
• Ethernet port provides system configuration and performance monitoring using web pages or SNMP
• Front-panel features include status display, navigation buttons, power switch, and LED indicators
• “1U” enclosure weighs less than 6 pounds (2.7 kg)

Technical Specifications

Ethernet Interface
Type
10/100, auto MDI/MDI-X
Connector
RJ45 (8-pin modular)
Status LEDs
2, link and activity
Supported Protocols
HTTP, SNMP, DHCP, DNS
Display
Vacuum fluorescent (emissive) with color LED backlighting
Power Inputs
AC Mains
100 to 240 V, 50/60 Hz, 24 W max, varies by configuration
AC Mains Connector
3-blade, IEC 320 C14-compatible (mates with C13)
DC
10 to 18 V, 1.6 A max, varies by configuration
DC Connector
4-Pin male XLR-type
Dimensions (Overall)
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
11.50 inches deep (29.2 cm)
Mounting
One space (1U) in a standard 19-inch rack
Weight
5.5 pounds (2.5 kg)
SDI Inputs
Quantity
Up to 12, in groups of three depending on ordered configuration
Data Rate
270 Mb/s to 2.97 Gb/s
Supported Standards
3G-SDI (SMPTE 424M), HD-SDI (SMPTE 292), SD-SDI (SMPTE 259M), DVB-ASI (AES3 digital audio transport not supported)
Connector
BNC, 3G-SDI optimized, gold plating on center pin, per IEC 61169-8 Annex A
Type
Unbalanced
Impedance
75 ohms
SDI Loop-Through Outputs
Quantity
One associated with each SDI input
Source
Re-clocked copy of input
Data Rate
270 Mb/s to 2.97 Gb/s
Supported Standards
3G-SDI, HD-SDI, SD-SDI, DVB-ASI
Connector
BNC, 3G-SDI optimized, gold plating on center pin, per IEC 61169-8 Annex A
Type
Unbalanced
Impedance
75 ohms
Level
800 mV p-p, nominal
Optical Outputs
Quantity
Up to four, depending on ordered configuration
Compliance
SMPTE 297 (as applicable)
Fiber Type
Single-mode
Connector
ST PC (SC optional)
Multiplexed Wavelengths
1310 nm (FP), 1490 nm (DFB), 1550 nm (DFB)
Launch Power
-3 dBm nominal @ 1310 and 1550 nm; -1 dBm nominal @ 1490 nm
Typical Fiber Length
10 km minimum
Optical Inputs
Quantity
Up to four, depending on ordered configuration
Compliance
SMPTE 297 (as applicable)
Fiber Type
Single-mode
Connector
ST PC (SC optional)
Wavelengths Supported
1310 nm, 1490 nm, and 1550 nm
Receive Sensitivity
-17 dBm, nominal @ 2.97 Gb/s
Maximum Input Power
-3 dBm, nominal
Item Includes
1x Studio Technologies Model 400-6R SDI-Over-Fiber Transport System - Receiver