Teradek Beam Wireless Video and Audio Receiver, No Mount

SKU: TRD-100572 Category:
Brand: Teradek

$2,661.00

This is Beam Receiver with 3G-SDI Output and includes a dedicated bidirectional IFB channel.

Beam is multicast capable to an unlimited number of Receivers over LAN and to up to 4 receivers over WiFi.

Key Features

  • Wireless Video & Audio Receiver
  • Supports Resolutions up to 1080p60
  • 2500′ Distance with 90 ms-110 ms Latency
  • Uses License-Free 5 GHz Frequency
  • 3G-SDI Output
  • Accepts H.264 Encoded Transmissions
  • RTSP and MPEG-TS Streaming
  • RJ45 Ports for Wired LAN Transfer
  • 30 Mbps Bit Rate; 50 Mbps over LAN
  • Mic & Headphone Communication I/O

Technical Specifications

Sdi Compliance
SMPTE 259M BI.656: SDTV Digital Signal/Data Serial Digital Interface
SMPTE 292M BT.1120: 1.5Gb/s Signal/Data Serial Digital Interface
SMPTE 425M: 3Gb/s Signal/Data Serial Digital Interface
SMPTE 299M: 16bit Digital Audio Format for SMPTE 292M
SMPTE 352M: Video Payload Identification for Digital Interfaces
Video Outputs
Looping 3G/HD/SD-SDI: BNC
Delay Tx To Rx
90-110 milliseconds
Supported Resolutions
1080i50,59.94, 60
1080PsF23.98,24, 25, 29.97, 30
1080p23.98, 24,25, 29.97, 30, 50, 59.94, 60
720p23.98, 24, 25,29.97, 30, 50, 59.94, 60
576i50 (PAL)
480i59.94 (NTSC), 480i60 (861-D)
Video Compression
H.264 Baseline Profile Level
4.2 with de-interlacing
Supported Video Bitrate
RTSP Server – Up to 30Mbps
MPEG2-TS Server – Up to 15Mbps
Color Correction
None
Audio Input
Main Digital Audio In
SDI embedded audio: 48kHz 16-bit stereo linear PCM
Talk-Back Analog Audio In
8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Audio Output
Main Digital Audio Out
SDI embedded audio: 48 kHz 16-bit stereo linear PCM
Main Analog Audio Out
48 kHz 16-bit stereo linear PCM with mini stereo phone output jack
Dimensions
6.7" x 4.1" x 1.1" (170 x 105 x 28 mm)
Weight
21.5oz (610g)
Http
Feature-rich WebUI for configuration and control
Configuration Interfaces
OLED Display with joystick Navigation buttons
Switches
On/Off and Reset Switch
External Control
Full duplex RS422 serial port
Ethernet
10/100 BASE-TX, RJ-45 jack
Wireless
WiFi:IEEE 802.11a/n: OFDM
Frequencies – U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
Wireless Protected Setup for easy set up and security configuration
Usb
Factory reset
IP configuration or firmware upgrade without PC
Encryption
802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
Rf Power
Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
Radio Standard – IEEE 802.11a/n: OFDM
Antenna – 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
Range
2500 ft+-200 ft
Unicast Multicast
Multicast
WiFi: Up to 4 Receivers
LAN: No limit on number of receivers
Power Input
7V-17V DC
Nominal Power Consumption
12 W
Operating Temperature
0 ~ 50 deg-C
What’s In The Box?
1 x Beam RX
1 x Lightstand Adapther 1/4-20 in.
1 x PSU 2-pin Connector to 18W AC Adapter (Int) – 6 ft. Cable
1 x Quickstart Guide – BEAM
2 x Thumb Screw Plastic Head Black 1/4-20 Thread
1 x Box White BOLT PRO 2000/600 RX
3 x Antenna WiFi Beam TX/RX
1-Year Warranty

SKU: TRD-100572 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Teradek Beam Wireless Video and Audio Receiver, No Mount”

There are no reviews yet.