Teradek Bolt 4K 750 Transmitter/Receiver Wireless Set, 10-2100

SKU: TRD-BOLT4K750SET-102100 Category:
Brand: Teradek

$7,989.00

Bolt 4K is a revolution in wireless video featuring the best reliability and image quality in the industry.

Real-Time 4K Wireless Video

Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.

True HDR Color

Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.

Rock-Solid Reliability

Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.

Universal Compatibility

Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.

Inputs/Outputs

Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.
Receiver: 2x 12G-SDI, 1x HDMI 2.0

Battery Plates

Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.

Camera Metadata

Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.

Bolt App for iOS

Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.

Key Features

  • Includes: 1 TX & 1 RX
  • Video: Up to 4K60FPS
  • Range: 750 ft.
  • Inputs: 12G-SDI, HDMI 2.0
  • Outputs: 12G-SDI, HDMI 2.0
  • Multicast: Up to 6 RXs
  • Compatibility: Bolt 4K 750, Bolt 4K 1500

Technical Specifications

Bolt 4K 750 TX No Mount
Video Inputs
1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
Video Outputs
1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω
Sdi Ancillary Data Support
Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling
SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Input Cross Conversion
Yes, HDMI to SDI
Delay Tx To Rx
<0.001sec
Supported Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Compression
Visually Lossless
Video Format Conversion Support
Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction
None
Audio Format
48kHz 24-bit PCM
Audio Input
Embedded SDI/HDMI Audio Input (2 Channel)
Dimensions
132 x 91 x 27 mm
Weight
358g (12.6 Oz)
Construction
Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability
Multiple mounting options with 1/4″x20 and M3 holes
Configuration Interfaces
OSD with Menu, Joystick Navigation
Switches
On/Off Switch
Usb Interface Functionality
Upgrade via Micro-USB
Antennas
4 External 2dBi RP-SMA antennas (included)
Wireless
Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies: 5.270 ~ 5.670 GHz
Channel Bandwidth
14x 40MHz wide channels
Rf Channel Selection
Auto, Manual
Manual available for non-DFS Channels
Encryption
AES-256, RSA-1024 key exchange
Rf Power
19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power)
Range
Up to 750 ft, line of sight
Unicast Multicast
Can connect one Transmitter to up to 6 Receivers
Noise Rejection
Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Power Input
2-Pin Circular locking Connector 6-28 VDC
Battery
None, optional Gold or V mount battery plate
Nominal Power Consumption
20 Watts
Operating Temperature
0-40 deg C

Bolt 4K 750 RX No Mount
Video Outputs
2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
Sdi Ancillary Data Support
Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling
SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Input Cross Conversion
Yes, HDMI to SDI
Delay Tx To Rx
<0.001sec
Supported Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Compression
Visually Lossless
Video Format Conversion Support
Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction
17x17x17 3D LUT (supports 10-bit color)
Audio Format
48kHz 24-bit PCM
Audio Output
Embedded SDI/HDMI Audio Output (2 Channel)
Dimensions
112 x 139 x 27 mm
Weight
432g (15.2 Oz)
Construction
Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability
Multiple mounting options with 1/4″x20 and M3 holes
Configuration Interfaces
OSD with Menu, Joystick Navigation
Switches
On/Off Switch
Usb Interface Functionality
Upgrade via Micro-USB
Antennas
5 External 2 dBi antennas (included) or optional Array Panel Antenna
Wireless
Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies: 5.270 ~ 5.670 GHz
Channel Bandwidth
14x 40MHz wide channels
Rf Channel Selection
Auto, Manual
Manual available for non-DFS Channels
Encryption
AES-256, RSA-1024 key exchange
Rf Power
17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range
Up to 750 ft, line of sight
Unicast Multicast
Can connect one Transmitter to up to 6 Receivers
Noise Rejection
Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Power Input
2-Pin Circular locking Connector 6-28 VDC
Battery
None, optional Gold or V mount battery plate
Nominal Power Consumption
18 Watts
Operating Temperature
0-40 deg C
What’s In The Box?
1 x Bolt 750 12G-SDI/HDMI Wireless TX
1 x Bolt 750 12G-SDI/HDMI Wireless RX
1 x Lightstand Adapter 3/8in
1 x Hot Shoe Adaptor
2 x HDMI Male Type A (Full) – HDMI Male Type A (Full) 18in Cable
2 x (Bit 118) 2pin Conn. to PowerTap – 18in Cable
1 x USB Male Type A (Full) – USB Male Type B (Micro) -3ft Cable
2 x SDI 12G BNC to BNC Cable Length: 18in / 46cm
1 x Teradek Case Large – Bolt 4K TX/2RX
1 x Teradek Vinyl Zipper Bag 250x150mm
1 x Teradek Vinyl Zipper Bag 250x230mm
1 x PSU 2pin Conn. to 30W AC Adapter (Int) – 6ft Cable
9 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
1 x Teradek Standard Terms and Conditions
1 x Insert – Product Register
1 x Quickstart Guide – Bolt 4K 750/1500

SKU: TRD-BOLT4K750SET-102100 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Teradek Bolt 4K 750 Transmitter/Receiver Wireless Set, 10-2100”

There are no reviews yet.