Teradek COLR Duo 3D LUT 33-Point Dual HD-SDI with WiFi

SKU: TRD-100072 Category:
Brand: Teradek


COLR Duo is a wireless camera control bridge and 2 channel
LUT box, with support for 2 independent 33pt 3D LUTs. COLR Duo integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.

Looks Mean Everything
During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

Works with Pomfort LiveGrade
COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

Monitor Calibration with SpectraCal
Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

Key Features

  • LUT Box (CDL 1D and 33-Point 3D LUTs)
  • HDMI/SDI Cross-Converter
  • Wireless Controller for Ethernet Cameras
  • Supports 10-Bit Color
  • Simultaneous HDMI and SDI Outputs
  • Integrates with Pomfort LiveGrade Pro
  • Supports Virtually Every Camera Signal
  • Compatible with Virtually All Monitors
  • Convert RAW & LOG Signals for Monitoring
  • Part of Teradek Connected Set Workflow

Technical Specifications

Video Inputs
1 x SD/HD/3G-SDI (75 Ohm BNC)
Video Outputs
2 x SD/HD/3G-SDI (75 Ohm BNC)
Color Sampling
SDI Input/Output: 10-bit YCrCb 4:2:2
Supported Resolutions
1080p 23.98/24/25/29.97/30/50/59.94
1080i 50/59.94/60
1080PsF 23.98/24/25
720p 50/59.94/60
480i59.94, 576i50
Test Pattern Generator Support
Video Format Conversion Support
Color Correction
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Supports 2 Video Outputs with 2 independent LUT Pipelines each
Network Protocols
Software Or Platform Integration
Pomfort LiveGrade, SpectraCal CalMAN, and more
Audio Input
Embedded SDI Audio Input
Audio Output
Embedded SDI Audio Output
2” x 1” x 4” (50.8 x 25.4 x 101.6 mm)
6oz (170.1g)
WebUI for Configuration and Control
Configuration Interfaces
OLED Display with joystick navigation buttons
On/Off Switch
Usb Interface Functionality
Powered USB 2.0 host port
Ethernet: 10/100/1000BASE-T Gigabit
WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
Rf Channel Selection
Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
Configurable to specific channels
Power Input
2 Pin Connector Power Input
Nominal Power Consumption
8W, 7W(no WiFi)
Auxilary Power Input
6-28V DC
What’s In The Box?
1 x Power Supply Unit 2-pin Connector to 18W AC Adapter(Int) – 6 ft. Cable
2 x SDI – BNC to BNC Cable
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x Mini-USB to USB – 18 in. Cable
1 x Quickstart Guide – COLR
1 x Free Trial Code for Pomfort LiveGrade Pro
1-Year Warranty

SKU: TRD-100072 Category:

Based on 0 reviews

0.0 overall

Be the first to review “Teradek COLR Duo 3D LUT 33-Point Dual HD-SDI with WiFi”

There are no reviews yet.