Teradek Orbit PTZ 4K 12G-SDI/HDMI Camera Control Tally Wireless Receiver (10-2567)

SKU: TRD-ORBITPTZRECEIVER4K-102567 Category:
Brand: Teradek

$2,763.00

Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.

4K Wireless Video & Control for PTZ Cameras
Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera* and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.

*Compatible PTZ Cameras and Controllers

Reliable, Efficient Wireless Transmission
Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.

Real-Time Camera Control
Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!

Unbreakable Encryption
Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.

Easy Mobile Configuration
Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!

What’s In The Box?
1 x Ultra Thin HDMI Male Type A (Full) – HDMI Male Type A (Full) 18in Cable
1 x SDI 12G BNC to BNC Cable Length: 18in / 46cm
1 x PSU 2pin Conn. to 30W AC Adapter (Int) – 6ft Cable
5 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
1 x Teradek Standard Terms and Conditions
1 x Insert – Product Register
1 x Quickstart Guide – Orbit PTZ

Key Features

  • Wireless 4K / HD HDR video with < 1 ms latency
  • Uncompressed, 10-bit, 4:2:2 image quality
  • Up to 1,000 ft. of wireless range
  • License-free 5GHz operation
  • Transmit PTZ camera control commands via RS-232 and RS-422
  • AES-256 and RSA 1024 encryption
  • Supports all standard resolutions and frame rates, including HD and up to 4K60
  • Integrated tally light

Technical Specifications

Video Outputs
12G-SDI SMPTE 2082-1 standard / 75 ? (BNC x 1)
1 x HDMI 2.0 Type-A receptacle
Sdi Ancillary Data Support
Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling
SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Supported Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Compression
Visually Lossless
Video Format Conversion Support
Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction
17x17x17 3D LUT (supports 10-bit color)
Outputs +
Audio Output
Embedded SDI/HDMI Audio Output (2 Channel)
Dimensions
133.74mm x 139.2mm x 30.10mm (5.3” x 5.5” x 1.2”)
Weight
656g (23 oz)
Construction
Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability
Multiple mounting options with 1/4"x20 and 3/8"x16 holes
Configuration Interfaces
OSD with Menu, Joystick Navigation
Switches
On/Off Switch
Usb Interface Functionality
Upgrade via Micro-USB
Antennas
5 External 2 dBi antennas (included)
Wireless
Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies: 5.270 ~ 5.670 GHz
Encryption
AES-256, RSA-1024 key exchange
Rf Power
17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range
Up to 1000 ft, line of sight
Noise Rejection
Can coexist with WiFi and 5GHz cordless phones
Power Input
2-Pin Circular locking Connector 6-28V DC
Battery
None, optional Gold or V mount battery plate
Nominal Power Consumption
18 Watts
Operating Temperature
0-40-deg C

SKU: TRD-ORBITPTZRECEIVER4K-102567 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Teradek Orbit PTZ 4K 12G-SDI/HDMI Camera Control Tally Wireless Receiver (10-2567)”

There are no reviews yet.