Shure BLX1288/PG30 Dual Combo Wireless Microphone System, H8 518-542 MHz

Shure BLX1288/PG30 Dual Combo Wireless Microphone System, H8 518-542 MHz

Shure PG30: An Electret Condenser Microphone for Headworn Use with a Wireless Bodypack Transmitter
The Shure PG30 is a premium electret condenser microphone built for headworn use with a wireless bodypack transmitter. For added convenience, the durable BLX88 offers simple setup, intuitive controls, and microprocessor-controlled internal antenna diversity. You can quickly locate the best open frequency in case of interference using the one-touch QuickScan frequency selection. It's important to note that when purchasing separate wireless components, ensure that their frequency bands match for proper system operation.

Key Features

• XLR and 1/4 inch output connectors
• Microprocessor-controlled internal antenna diversity
• Two-color audio status indicator LED:
  Green: Normal audio levels
  Red: Excessive audio levels (overload / clipping)
• Quick and easy receiver frequency matching
• TQG connection for Shure lavalier, headset, earset and instrument microphones, and guitar cables
• Easily accessible On / Off switch

Technical Specifications

BLX1
Audio Input Level
Max: -16 dBV maximum
Min (0 dB): +10 dBV maximum
Gain Adjustment Range
26 dB
Input Impedance
1 MΩ
RF Transmitter Output
10 mW, typical
varies by region
Dimensions
4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D
Weight
2.6 oz. (75 g), without batteries
Housing
Molded ABS
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline
Battery Life
up to 14 hours (alkaline)

BLX2
Audio Input Level
0dB: -20 dBV maximum
-10dB: -10 dBV maximum
Gain Adjustment Range
10 dB
RF Transmitter Output
10 mW, typical
varies by region
Dimensions
8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia.
Weight
7.7 oz. (218 g) without batteries
Housing
Molded ABS
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline
Battery Life
up to 14 hours (alkaline)

BLX88
Output Impedance
XLR connector: 200 Ω
6.35 mm (1/4") connector: 50 Ω
Audio Output Level
Ref. ±33 kHz deviation with 1 kHz tone
XLR connector: -27 dBV (into 100 kΩ load)
6.35 mm (1/4") connector: -13 dBV (into 100 kΩ load)
RF Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
>50 dB, typical
Dimensions
1.50 in. X 12.13 in. X 3.98in. (38 mm X 308 mm X 101 mm) H x W x D
Weight
15.1 oz. (429 g)
Housing
Molded ABS
Power Requirements
12-15 V DC @ 235 mA (BLX88, 320 mA), supplied by external power supply (tip positive)

What's included?
BLX88 dual-channel receiver
PGA31 headset microphone w/ BLX1 bodypack transmitter
PG58 handheld transmitter
Power supply
Microphone clip
Lavalier clip
Lavalier windscreens
2 sets of AA batteries
User guide