Sony ECM-W3S Single-Channel Wireless Microphone

Sony ECM-W3S Single-Channel Wireless Microphone

Single-channel wireless microphone for high-quality digital recording
The ECM-W3S comprises a microphone-transmitter featuring high signal-to-noise (S/N) ratio microphone unit, and a single-channel receiver. The transmitter and receiver process audio digitally and transmit it wirelessly, allowing the capture and recording of one speaker's voice with superb clarity and low noise.

High-quality digital sound recording
High signal-to-noise ratio (S/N) microphone units are integrated into the microphone-transmitter, enabling clear voice recording with low noise.

High-quality digital transmission
Connecting the single-channel receiver to a camera1 from Sony that supports the Multi Interface (MI) Shoe, such as one of the α™ series digital interchangeable-lens cameras or vlog cameras, allows the digital audio signal output from the receiver to be recorded directly by the camera, enabling high-quality sound recording with minimal noise contamination.

Noise-suppressing filter functions
A noise cut filter using digital signal processing to effectively remove noise, and a low cut filter that reduces noise in the low-frequency range, are provided on the microphone side. Less noise removal is needed post-production, making workflow more efficient.

Multi Interface (MI) Shoe compatible
The receiver can be easily attached to a camera1 from Sony that supports the Multi Interface (MI) Shoe, such as one of the α™ series digital interchangeable-lens cameras or vlog cameras, without cables, allowing immediate sound acquisition and avoiding interference with the vari-angle LCD monitor even when it is opened horizontally for shooting. This allows a greater degree of freedom and mobility when shooting.

The convenience of wireless
The ECM-W3S comprises a microphone-transmitter and a single-channel receiver, allowing wireless sound capture of one speaker's voice. Communication is possible at up to 492 ft (150 m)5 in clear line-of-sight locations, with Bluetooth 5.3 (Bluetooth Low Energy) and LC3plus3 codecs providing low power consumption, low latency, and high sound quality. Power saving has also enabled a reduction in battery size.

Safety and attenuator functions
A safety function is provided that allows simultaneous recording of two audio signals, one at normal volume and the other 20 dB lower, reducing the risk of clipping during loud recording. An attenuator function is also provided, allowing the recording level to be set to one of three values according to the audio volume.

Microphone audio input/output
A 3.5 mm mini jack (monaural) is provided as an external microphone input terminal on the microphone side, and a 3.5 mm mini jack (stereo) on the receiver side serves as an audio output terminal. In addition to sound acquisition using a stereo-compatible lavalier microphone, output to devices not equipped with a Multi Interface (MI) Shoe is also possible.

USB digital audio output
Digital audio (48 kHz / 24 bit) can be output from the receiver via USB cable to a smartphone or PC, or to a USB audio input compatible device4 for recording.

Compact and lightweight design
Both the microphone-transmitter and receiver have excellent mobility and portability, and are compact and lightweight enough not to get in the way when carrying or shooting. Designed to be dust- and moisture-resistant5, they can be used outdoors without worry.

Status notification functions
The LINK lamp indicates the status of the communication channel between the microphone and receiver to prevent recording errors. The POWER lamps on both the microphone and receiver indicate battery level to prevent recording errors due to dead batteries.

Technical Specifications

Kit Content 1
Description
Microphone (transmitter)
Dimension (approx.)
W 25.0 mm x H 52.5 mm x D 20.5 mm (1 inches x 2 1/8 inches x 13/16 inches)
Weight (Approx.)
17 g (0.6 oz)

Kit Content 2
Description
Receiver
Dimension (approx.)
W 32.0 mm x H 29.0 mm x D 50.0 mm (1 5/16 inches x 1 3/16 inches x 2 inches)
Weight (Approx.)
25 g (0.9 oz)

Kit Content 3
Description
Charging case
Dimension (approx.)
W 68.5 mm x H 41.5 mm x D 65.5 mm (2 3/4 inches x 1 11/16 inches x 2 5/8 inches)
Weight (Approx.)
90 g (3.2 oz)

Supplied Accessory
Name / Model (Count)
Wind Screen (1), Connector Protect Holder/Stand (1), Pouch (1), Charging case (1)
Warranty
Provided

Microphone Compatibility
Compatible Cameras
ILME-FX3, ILME-FX30, ILME-FX30B, ILCE-6700, ILCE-6700L, ILCE-6700M, ILCE-7CM2, ILCE-7CM2L, ILCE-7CR, ILCE-7RM5, ZV-E1, ZV-E1L, ILCE-7M4, ILCE-7M4K, ILCE-7RM4A, ZV-E10, ZV-E10L, ILCE-1, ILCE-7C, ILCE-7CL, ILCE-7SM3, ILCE-9M2, ILCE-7RM4

Microphone Specification
Operating Temperature
0-deg C to +40-deg C (+32 °F to +104 °F)
Microphone Channel Audio Output
2ch
Shoe type
Multi Interface Shoe
Power Supply from Main Unit
Multi Interface Shoe
Battery Type
Built-in lithium-ion battery
Number of Battery Required
1
Monaural / Stereo
Monaural
Directivity
omni-directional
Frequency Response
20 Hz to 20 000 Hz
Front sensitivity
-20 dBFS (0.1 Pa, 1 kHz)* * Acquired while "10dB" is selected by the ATT switch.
Intrinsic noise
16 dB SPL or less (0 dB = 2×10⁻⁵ Pa)* * Acquired while "10dB" is selected by the ATT switch. * Acquired while "DIGITAL" is selected by the slide switch.
Maximum Input Sound Pressure Level
120 dB SPL* * Acquired while "10dB" is selected by the ATT switch. * Equivalent sound pressure level value converted from the input level value that is acquired when 1% waveform distortion is produced by 1 kHz output signals from the microphone. (0 dB = 2×10⁻⁵ Pa)
Microphone out jack
Yes (3.5 mm mini jack (stereo))
External microphone input jack
Yes (3.5 mm mini jack (monaural))
USB Type-C® Terminal
Yes

Package
Form
Color carton
Hook Attachment
Yes